User manual

166 Voyager 1250g User Guide
Character Activation Mode *Off HSTCEN0 52
On HSTCEN1 53
Activation Character HSTACH## 53
Do Not End Character Activation
After Good Read
HSTCGD0 53
*End Character Activation After
Good Read
HSTCGD1 53
Character Activation Laser
Timeout (Range 1 - 65525) *5000
ms
HSTCDT##### 53
Character Deactivation Mode *Off HSTDEN0 54
On HSTDEN1 54
Deactivation Character HSTDCH## 54
Reread Delay Short (500 ms) DLYRRD500 54
*Medium (750 ms) DLYRRD750 54
Long (1000 ms) DLYRRD1000 55
Extra Long (2000 ms) DLYRRD2000 54
User-Specified Reread Delay Range 0 - 30,000 ms DLYRRD##### 55
Output Sequence Editor Enter Sequence SEQBLK 58
Default Sequence SEQDFT 58
Sequence Timeout (Range 1 - 65535) *5000 ms SEQDLY##### 58
Sequence Match Beeper *On SEQBEP1 58
Off SEQBEP0 58
Partial Sequence Transmit Partial Sequence SEQTTS1 59
*Discard Partial Sequence SEQTTS0 59
Require Output Sequence Required SEQ_EN2 59
On/Not Required SEQ_EN1 59
*Off SEQ_EN0 59
No Read On SHWNRD1 59
*Off SHWNRD0 60
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 63
Prefix Add Prefix PREBK2## 63
Clear One Prefix PRECL2 63
Clear All Prefixes PRECA2 63
Suffix Add Suffix SUFBK2## 63
Clear One Suffix SUFCL2 63
Clear All Suffixes SUFCA2 63
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page