User manual

Voyager 1250g User Guide 163
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR0 41
*Power Up Beeper On - Scanner BEPPWR1 41
Beep on BEL Character Beep on BEL On BELBEP1 41
*Beep on BEL Off BELBEP0 41
Beeper - Good Read Off BEPBEP0 42
*On BEPBEP1 42
Beeper Volume - Good Read Off BEPLVL0 42
Low BEPLVL1 42
Medium BEPLVL2 42
*High BEPLVL3 42
Beeper Pitch - Good Read
(Frequency)
Low (1600 Hz) BEPFQ11600 42
*Medium (2350 Hz) BEPFQ12350 43
High (4200 Hz) BEPFQ14200 43
Beeper - Transmit Order *Before Transmission BEPWHN1 43
After Transmission BEPWHN2 43
Beeper Pitch - Error (Frequency) *Razz (100 Hz) BEPFQ2100 43
Medium (2000 Hz) BEPFQ22000 43
High (4200 Hz) BEPFQ24200 43
Beeper Duration - Good Read *Normal Beep BEPBIP0 44
Short Beep BEPBIP1 44
Number of Beeps - Good Read Range 1 - 9 (*1) BEPRPT# 44
Number of Beeps - Error Range 1 - 9 (*1) BEPERR# 44
LED Settings *Red LED Off LEDFN10 45
Green LED Off LEDFN20 45
Red LED On with Good Scan LEDFN11 45
*Green LED On with Good Scan LEDFN21 45
Red LED On with Laser LEDFN12 45
Green LED On with Laser LEDFN22 45
Red LED On when CodeGate
Disabled
LEDFN14 45
Green LED On when CodeGate
Disabled
LEDFN24 45
Red LED On when In-Stand LEDFN18 45
Green LED On when In-Stand LEDFN28 45
Red LED On with CTS LEDFN1128 45
Green LED On with CTS LEDFN2128 46
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page