User manual

162 Voyager 1250g User Guide
RS232 Handshaking *RTS/CTS Off 232CTS0 33
Flow Control, No Timeout 232CTS1 33
Character-Based Flow Control, No
Timeout
232CTS7 33
Two-Direction Flow Control 232CTS2 33
Flow Control with Timeout 232CTS3 33
Character-Based Flow Control
with Timeout
232CTS9 33
RS232 Timeout (Range 1-5100)
*1000 ms
232DEL#### 33
*XON/XOFF Off 232XON0 34
XON/XOFF On 232XON1 34
*ACK/NAK Off 232ACK0 34
ACK/NAK On 232ACK1 34
Communication Timeout
(Range 1-65535) *2000 ms
232DLK##### 34
Communication Timeout Beeper -
Off
HSTTOA0 35
*Communication Timeout Beeper
- On
HSTTOA1 35
BEL/CAN Mode On BELCAN1 35
*BEL/CAN Mode Off BELCAN0 36
RS232 Defaults Reset RS232 Defaults 232DFT 36
NCR Modifiers
NCR ACK/NAK *NCR ACK/NAK Off NCRACK0 36
NCR ACK/NAK On NCRACK1 36
Block Check Character *Transmit NCRBCC1 36
Don’t Transmit NCRBCC0 37
NCR Prefix/Suffix NCR Prefix NCRPR2## 37
NCR Suffix NCRSF2## 37
Transmit Prefix/Suffix NCRBCP1 37
*Don’t Transmit Prefix/Suffix NCRBCP0 37
NCR NOF (Not-on-File) Error On NCRRAZ1 38
*Off NCRRAZ0 38
Scanner to Bioptic Communication *Packet Mode Off 232PKT0 38
Packet Mode On 232PKT2 38
*ACK/NAK Off 232ACK0 39
ACK/NAK On 232ACK1 39
Communication Timeout
(Range 1-65535) *2000 ms
232DLK##### 39
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page