User manual

Voyager 1250g User Guide 149
side is loaded with the parameters' form belonging to that particular category. The
"Configure" tree option has all the programming and configuration parameters
specified for a scanner. You can set or modify these parameters as required. You
can later write the modified settings to the scanner, or save them to a dcf file.
Install EZConfig Cloud for Scanning
Use the EZConfig Cloud for Scanning tool to configure your scanner online:
1. Access the Honeywell web site at www.honeywellaidc.com
2. Click on the Browse Products tab. Under Software, select Device
Management.
3. Click on EZConfig Cloud for Scanning.
4. Scroll to the bottom of the page and click on Register for free access now to
sign up.
Reset the Factory Defaults
If you aren’t sure what programming options are in your scanner, or you’ve
changed some options and want to restore the scanner to factory default settings,
first scan the Remove Custom Defaults bar code, then scan Activate Defaults.
This resets the scanner to the factory default settings.
The Serial Programming Commands, beginning on page 151 list the factory
default settings for each of the commands (indicated by an asterisk (*) on the pro-
gramming pages).
Caution: This selection erases all your settings and resets the scanner to the
original factory defaults. It also disables all plugins.
Remove Custom Defaults
Activate Defaults