User manual

144 Voyager 1250g User Guide
Postal Codes
The following lists linear postal codes. Any combination of linear postal code selec-
tions can be active at a time.
China Post (Hong Kong 2 of 5)
<Default All China Post (Hong Kong 2 of 5) Settings>
China Post (Hong Kong 2 of 5) On/Off
China Post (Hong Kong 2 of 5) Redundancy
If you are encountering errors when reading China Post (Hong Kong 2 of 5) bar
codes, you may want to adjust the redundancy count. Redundancy adjusts the
number of times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it will take
to decode the bar code. To adjust the redundancy, scan the China Post (Hong
Kong 2 of 5) Redundancy bar code below, then scan a redundancy count between
0 and 10 on the Programming Chart on page 202. Then scan the Save bar code.
Default = 0.
EAN8 to EAN13 Conversion
* GS1 Emulation Off
On
* Off
China Post (Hong Kong 2 of
5) Redundancy