User manual

136 Voyager 1250g User Guide
To adjust the redundancy, scan the EAN/JAN-8 Redundancy bar code below, then
scan a redundancy count between 0 and 10 on the Programming Chart on page
202. Then scan the Save bar code. Default = 0.
MSI
<Default All MSI Settings>
MSI On/Off
MSI Check Character
Different types of check characters are used with MSI bar codes. You can program
the scanner to read MSI bar codes with Type 10 check characters.
Default = Validate Type 10, but Don’t Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner
will only read MSI bar codes printed with the specified type check character(s), and
will transmit the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don’t Transmit, the unit
will only read MSI bar codes printed with the specified type check character(s), but
will not transmit the check character(s) with the scanned data.
EAN/JAN-8 Redundancy
On
* Off
* Validate Type 10, but Don’t
Transmit