User manual

Voyager 1250g User Guide 129
EAN-13 Beginning with 977 Addenda Required
This setting programs the scanner to require a 2 digit addenda only on EAN-13 bar
codes that begin with “977.” The following settings can be programmed:
Require 2 Digit Addenda: All EAN-13 bar codes that begin with “977” must have a
2 digit addendum. The EAN-13 bar code with the 2 digit addendum is then trans-
mitted as a single, concatenated bar code. If a 2 digit addendum is not found
within the Addenda Timeout period, the EAN-13 bar code is discarded.
Don’t Require 2 Digit Addenda: If you have selected Require 2 Digit Addenda, and
you want to disable this feature, scan Don’t Require 2 Digit Addenda. EAN-13 bar
codes are transmitted, depending on the setting you are using for EAN/JAN-13
Addenda Required. Default = Don’t Require 2 Digit Addenda.
EAN-13 Beginning with 978 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
bar codes that begin with “978.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 bar codes that begin with “978” must have a
5 digit addendum. The EAN-13 bar code with the 5 digit addendum is then trans-
mitted as a single, concatenated bar code. If a 5 digit addendum is not found
within the Addenda Timeout period, the EAN-13 bar code is discarded.
Require 2 Digit Addenda
Require 5 Digit Addenda
Require 2 or 5 Digit Addenda
* Don’t Require 2 Digit Addenda
Require 2 Digit Addenda