User manual

124 Voyager 1250g User Guide

adjust the redundancy, scan the UPC-E0 Redundancy bar code below, then scan a

redundancy count between 0 and 10 on the Programming Chart on page 202.

Then scan the Save bar code. Default = 1.

EAN/JAN-13

EAN/JAN-13 On/Off

Convert UPC-A to EAN-13

When UPC-A Converted to EAN-13 is selected, UPC-A bar codes are converted to

13 digit EAN-13 codes by adding a zero to the front. When Do not Convert UPC-A

is selected, UPC-A codes are read as UPC-A.

UPC-E0 Redundancy

* On

Off

UPC-A Converted to EAN-13

* Do not Convert UPC-A