User manual

120 Voyager 1250g User Guide

Addenda Timeout

You can set a time during which the scanner looks for a coupon code. If a coupon

code is not found within this time period, the data can be either transmitted or dis-

carded, based on the setting you are using for UPC-A/EAN-13 with Extended

Coupon Code or UPC-A Number System 4 Addenda Required. Set the length (in

milliseconds) for this timeout by scanning the bar code below, then setting the tim-

eout (from 0-65535 milliseconds) by scanning digits from the Programming Chart,

then scanning Save. Default = 100.

Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.

UPC-E0

UPC-E0 On/Off

Most U.P.C. bar codes lead with the 0 number system. To read these codes, use the

UPC-E0 On selection. If you need to read codes that lead with the 1 number sys-

tem, use EAN/JAN-13 (page 124). Default = On.

Require Coupon Code, 2 Digit

Addenda, or 5 Digit Addenda

Addenda Timeout

* UPC-E0 On

UPC-E0 Off