User manual

118 Voyager 1250g User Guide
UPC-A/EAN-13 with Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code. When left on the default setting (Off), the scanner treats Coupon
Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon
code and the extended coupon code in a single scan, it transmits both as one sym-
bology. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read the
coupon code and extended coupon code in a single read to transmit the data. No
data is output unless both codes are read. Default = Off.
UPC-A Number System 4 Addenda Required
This setting programs the scanner to require a coupon code only on UPC-A bar
codes that begin with a “4.” The following settings can be programmed:
Require Coupon Code: All UPC-A bar codes that begin with a “4” must have a cou-
pon code. The UPC-A bar code with the coupon code is then transmitted as a sin-
gle, concatenated bar code. If a coupon code is not found within the Addenda
Timeout period, the UPC-A bar code is discarded.
Don’t Require Coupon Code: If you have selected Require Coupon Code, and you
want to disable this feature, scan Don’t Require Coupon Code. UPC-A bar codes
are transmitted, depending on the setting you are using for UPC-A/EAN-13 with
Extended Coupon Code. Default = Don’t Require Coupon Code.
* Off
Allow Concatenation
Require Concatenation
* Don’t Require Coupon Code
Require Coupon Code