User manual

110 Voyager 1250g User Guide
ISBT 128 User-Defined Concatenation Sequences On/Off
The following selections allow you to enable or require the User-Defined ISBT 128
Concatenation Sequences.
If you scan Off, the User-Defined concatenation sequences are disabled.
If you scan the Allow User-Defined Sequence code, then the scanner will output
only the data combination specified in the User-Defined concatenation sequence
you created.
If you scan the Require User-Defined Sequence code, the data combination spec-
ified in the User-Defined concatenation sequence is required to transmit the data.
No data is output unless the sequence is read.
Default = Off.
2nd Left Identifier
1st Right Identifier
2nd Right Identifier
* Off
Allow User-Defined Sequence
Require User-Defined
Sequence