User manual

Voyager 1250g User Guide 107
ISBT 128
ISBT is a variation of Code 128 that supports concatenation of neighboring sym-
bols on a blood product label. Use the bar codes below to turn ISBT 128 concate-
nation on or off. Default =Off.
Concatenation Timeout
When searching for bar codes during concatenation, you may wish to set a delay
used to find the next bar code. Set the length (in milliseconds) for this delay by
scanning the bar code below, then setting the timeout (from 1-65535 millisec-
onds) by scanning digits from the Programming Chart, then scanning Save.
Default = 750.
ISBT 128 Predefined Concatenation Sequences
Note: You must enable Code 128 and ISBT 128 to use this feature.
The following bar codes are used to select the pre-defined ISBT 128 Concatenation
Sequence you wish to use. Once you have selected the concatenation sequence,
use ISBT 128 Predefined Concatenation Sequences On/Off to enable this feature.
Default = Donation ID Number (001) and ABO/RhD Blood Groups (002).
On
* Off
Concatenation Timeout
* Donation ID Number (001)
and ABO/RhD Blood Groups (002)
Donation ID Number (001) and
Donor ID Number (019)