User manual

Voyager 1250g User Guide 105

adjust the redundancy, scan the Code 11 Redundancy bar code below, then scan a

redundancy count between 0 and 10 on the Programming Chart on page 202.

Then scan the Save bar code. Default = 0.

Code 11 Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 88) for additional information. Minimum and Maximum lengths

= 1-80. Minimum Default = 3, Maximum Default = 80.

Code 128

Code 128 On/Off

Code 11 Redundancy

Minimum Message Length

Maximum Message Length

* On

Off