User manual

Voyager 1250g User Guide 103

that the higher the redundancy count, the longer it will take to decode the bar code.

To adjust the redundancy, scan the Matrix 2 of 5 Redundancy bar code below,

then scan a redundancy count between 0 and 10 on the Programming Chart on

page 202. Then scan the Save bar code. Default = 0.

Matrix 2 of 5 Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 88) for additional information. Minimum and Maximum lengths

= 1-80. Minimum Default = 3, Maximum Default = 80.

Code 11

Code 11 On/Off

Matrix 2 of 5 Redundancy

Minimum Message Length

Maximum Message Length

* Off