Manualshelf

User manual

ManualsBrandsHONEYWELL ManualsScannersVoyager 1250g Laser Black Hand-held USB
111112113114115116117118119120
100 Voyager 1250g User Guide
Straight 2 of 5 Industrial Redundancy
If you are encountering errors when reading Straight 2 of 5 Industrial bar codes,
you may want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode
the bar code. To adjust the redundancy, scan the Straight 2 of 5 Industrial Redun-
dancy bar code below, then scan a redundancy count between 0 and 10 on the
Programming Chart on page 202. Then scan the Save bar code. Default = 0.
Straight 2 of 5 Industrial Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 88) for additional information. Minimum and Maximum lengths
= 1-80. Minimum Default = 3, Maximum Default = 80.
Straight 2 of 5 IATA (two-bar start/stop)
Note: This symbology is also known as Airline Code 5.
<Default All Straight 2 of 5 IATA Settings>
Straight 2 of 5 IATA On/Off
Straight 2 of 5 Industrial
Redundancy
Minimum Message Length
Maximum Message Length
On