th e nd ra te fil ac hv st or e
e r o t s c a v h d n a r e t l i f the For fast, efficient service, contact us today at 1-800-347-2220 and look for us on the internet at www. precisionaire.com PRODUCT CATALOG AMKT0103a Supersedes all previous catalogs.
e r o t s c a v h d n a r e t l i f the Dear Customer, As a global leader in the production of high quality air filtration products, Flanders Corporation continues to develop new innovations in design, new methods of manufacturing and a higher level of customer service to provide you, our representative and distributor, with the most comprehensive product offering available to the filtration industry.
or e The widest selection of disposable panels you will find anywhere. Spun glass and synthetic media...all standard sizes and almost any “special” size. Polyester Panels, Links, Sleeves st Disposable Air Filters A complete line of aftermarket filter products for all styles of paintbooth...downdraft, cross-draft and work station. hv Paint Booth Products ac High grade polyester synthetic fiber media in a variety of styles, heat sealed onto heavy wire frames.
Medium & High Efficiency Extended Surface Type Filters st or e Huge line of “bag” filters in all of the most popular sizes and efficiencies, plus our new XDH bag which holds up to twice as much dust as ordinary bags. Metal Washable Filters Gas Phase and Odor Control hv Pleated panel filters that have been treated with special odor adsorbing/neutralizing materials, as well as 50% & 75% fill granular carbon filters. ac Rugged metal filters for a variety of applications.
Replacement Air Filter Catalog or e Table of Contents Disposable Air Filters: Page Heavy Duty Box Frame, Spun Glass or Synthetic Media . . . . . . . . . . . . . . . . .8 EZ Flow and EZ Flow II Continuous Filament Spun Glass, Box Frame Pinch Frame Framed Polyester Media with Metal on One Side . . . . . . . . . . . . . . . . . . . . . .12 st HD Industrial Grade . . . . . . . . . . . . . . . . . . . . . . .
Replacement Air Filter Catalog or e Table of Contents HEPA and 95DOP Filters 95% DOP Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Alpha Cell HEPA Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Alpha 2000 High Capacity HEPA Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Alpha HT High Temperature HEPA Filters . . . . . . . . . . . . . . . . . .
HD Industrial Grade Heavy Duty Disposable Panel Filters or e Spun Glass Media - Model 10255.xxxxxx Synthetic Media - Model 11255.xxxxxx Grille Sizes - Model 10355.xxxxx Flanders HD Industrial Grade filters are designed with a one-piece moisture-resistant chipboard frame enclosing media. Standard frames are nominal 1” thick (3/4” actual) and nominal 2” thick (1-5/8” actual).
Performance Data - HD Industrial Grade cfm @ 300 fpm Standard Carton Qty.
EZ Flow and EZ Flow II Disposable Panel Air Filters or e EZ Flow - Model 10155.xxxxxx EZFlow II - Model 10055.xxxxxx Construction The frame is made from heavy chipboard in a onepiece design that eliminates corner separation. ac SEALING is accomplished with a resilient hot-melt adhesive running the full perimeter of the frame on both upstream and downstream sides. UL MARKING appears on the filter frame. These filters have been tested by Underwriters Laboratories Inc.
Standard Sizes Performance Data - EZ Flow and EZ Flow II Actual Size H x W x D (in) cfm @ 300 fpm Standard Carton Qty. Weight per Carton (lbs.
Pinch Frame Disposable Panel Air Filters Originally designed for light commercial and industrial applications, the Flanders Pinch Frame filter is an excellent choice for use in residential furnace systems. The filter is produced on state-of-the-art production line machinery. The result is a filter of consistently high quality at a competitive price. Construction The media is made of 100% nonwoven polyester synthetic fibers chemically bonded with a fire retardant resin.
10x20x1 10x24x1 10x30x1 12x20x1 12x24x1 12x25x1 12x27x1 12x30x1 14x20x1 14x24x1 14x25x1 14x30x1 15x20x1 15x30x1 16x20x1 16x25x1 16x30x1 18x25x1 20x20x1 20x24x1 20x25x1 20x30x1 24x24x1 25x25x1 9-7/8 x 19-7/8 x 7/8 9-7/8 x 23-7/8 x 7/8 9-7/8 x 29-7/8 x 7/8 11 -7/8 x 19-7/8 x 7/8 11 -7/8 x 23-7/8 x 7/8 11 -7/8 x 24-7/8 x 7/8 11-7/8 x 26-7/8 x 7/8 11 -7/8 x 29-7/8 x 7/8 13-7/8 x 19-7/8 x 7/8 13-7/8 x 23-7/8 x 7/8 13-7/8 x 24-5/8 x 7/8 13-7/8 x 29-7/8 x 7/8 14-7/8 x 19-5/8 x 7/8 14-7/8 x 29-7/8 x 7/8 15-5/8 x 1
Link Panels st Cubes are internally supported filters similar to the Polyester Panel. The exception is greater surface area for contamination capture. Unitary, 2-pocket or 3-pocket construction is available throughout our entire product offering. Cubes are available with 13/16” thick headers for side access installations or other systems where a header is required.
Series ST55-Polyester Panel Two-ply 1” nominal media construction using a 1/2” nominal white polyester on the upstream, followed by a 1/2” nominal green super tackified polyester downstream.
or e Paintbooth Filtration Flanders offers a wide variety of filtration products for downdraft and crossdraft paintbooths and prep stations. For the most part, fitlration products required for all of these fall into three general categories which are color coded to the drawings at left which indicate their placement in each type of booth. ac st Downdraft Intake Filters te ra hv nd Prep Station Air Intake filters are as important to a great paint job as the booth itself.
SA600-G10 Diffusion Media for Air Intake or e Models SA600-xxx The SAR-1 media, made in Switzerland, has a 1/2“ loft, and is optimally designed for efficiency and dust holding capacity. For crossdraft booths, the SAR-1 pad, sometimes referred to as a blanket, is tucked into the doors of the booth. There is usually only one large pad on each door. Oversized SAR-1 media pads can be easily trimmed. ac Model SAR1Pxx-xxxx For use in crossdraft and some downdraft booths.
Series ST55 Panel for Air Intake Series 332 comes in 200 ft. rolls and in pads for crossdraft and semi-downdraft booths. Series 332 is made from air-laid fiberglass forming a 2.5” thickness and a thin polyester layer bonded to the exit side for added efficiency. or e Models ST55R-xxxx and ST55L-xxxx-xx Series 332 fibers are ideal for paint capture due to their loose weave.
Series 331Y PA Series 330G is made from air-laid fiberglass forming a 2.5” thickness. The exit side has a skin backing for added efficiency. Models 331Y-xxx or e Series 330G fibers are ideal for paint capture due to their loose weave. The paint particles collide with the fiberglass fibers and are removed from the airstream. Series 225T Cube Models CUBx225Txxxxxx ac 22 gram Fiberglass Paint Arrestor for use in all booth types. Series 331Y is a high quality fiberglass media.
Andrea and PS125 Exhaust Filters Models ANDREA and 125PAD-xxxx ac The Series 425T has an added layer of media applied to the downstream side of the filter. Although the construction is the same as the Series 325T, the added layer of single denier polyester fibers gives the Series 425T a 99% efficiency rating. PS125-Bag or e The Series 325T is made from a polyester media supported by a 9 gauge wire frame.
members bonded to the media on the air entering and leaving sides for unsurpassed frame strength, locking corners and positive media-to-frame seal reduces the possibility of air bypass. st or e port. The media overlaps the support, which provides a gasketing effect reducing air bypass around the filter. The filter is made from fully synthetic, high-loft and reinforced media.
ance. The standard offering of KKM filters includes six of the most popular face sizes in 1” and 2” depths. Special face sizes and 1/2” depth filters are also available. For ease of installation, all filters are undercut slightly on length, width and depth. or e The filter media consists of 100% high bulk polyester fibers that are thermo-bonded with a fire retardant res” Support grilles of expanded metal are provided on both sides of the filter.
PS125-Bag PS125-Cube, PS125-Sock Models125BAG-xxxxxx Models125SOCK-xxxx st or e Scrim-Back polyester media bags as prefilter. PS125 Bags are made from a single denier polyester media that contains a scrim backing for extra rigidity. The PS125 Bags each contain a metal wire support and a 1” channel frame for easy placement. *Our filters are not affiliated with SPRAYBAKE®. Use of the registered SPRAYBAKE® name is for comparative purposes only.
FP319A or e Two-stage and Three-stage Paint Systems Paintbooth Filtration Pads: FP319AxxxxPAD, Ring Panels: FP319A2020PRK, Cubes: FP319Axxxx , Bags: FP319Axxxxxxxx Two-Stage The Flanders FP319A-Chromate Recovery System is offered in both two-stage and three-stage configurations for aerospace overspray painting environments. The two-stage version of the Flanders system utilizes a proprietary synthetic media pad in combination with a proprietary synthetic media bag type filter.
Three-Stage 1 2 3 Avg nd 1. Dexter (A) 454-5 + (B) X-395 fuel tank coating mix-yellow - With a conventional air gun operating at 45 psi, with spray feed rate of 105 gr/min @ 120 fpm, Initial pressure drop was .15” w.g. Running to final pressure drop at .70” w.g., average removal efficiency was measured at 99.97% efficiency, with 470 grams dust holding capacity on the first stage, 981 grams holding capacity on the second stage and 1140 grams holding capacity on the third stage.
Cut-to-Fit Kwik Kuts These are 15”x24” pads of filter media that can be easily cut to fit any window or wall mounted room air conditioner. They are offered in the same spun glass, foam and aluminum media described above. Also offered are 1/2” Permaire (see column at right) and plastic-backed foam. nd Flanders Service Rolls air filtration media are manufactured in selected widths, prepared in roll lengths that make manageable roll sizes.
Cut-to-Fit st Permaire filters are passive electrostatic type products. Air running over the maze of fibers creates an electrostatic charge to catch and hold airborne contaminants. Dust particles may become charged naturally, and if so, they are held by strong electrostatic forces to the oppositely charged fiber with which they come into contact. The smaller a particle or fiber, the relatively stronger the electrostatic charges will be attained.
Bulk Media and Pads or e Cut -To-Fit Room Air Conditioner, Furnace and Central Air Filters Bulk media rolls are offered in selected slit widths with roll lengths determined by manufacturing processes. Pre-cut pads, as the name implies, are pads of filtration media cut to standard filter face sizes or to your desired custom sizes. st Polyester Synthetic Fiber Polyester Synthetic Fiber (PSF) media is extremely resilient and will withstand direct moisture.
or e st ac hv nd ra te fil e th Flanders - Foremost in Air Filtration Corporate Headquarters, St.
Auto Rolls Scrim-back spun glass (Models AESx, BLCSxx, CBSx, FSx, CRSx, CSx, AMSx, TSxx, LRSx) Skin-back spun glass nd ModelsAEx, BLCx, CBx, Fxx, CRx, Cx, AMx, Tx, LRxx) A nominal 2” thickness progressive density spun glass treated with dust-catching adhesive. The roll is backed on the downstream side with a spun glass “skin”.
or e st ac hv nd ra te fil e th Flanders - Foremost in Air Filtration Corporate Headquarters, St.
Pre Pleat 40 Extended Surface Pleated Filters or e Economy Capacity: 84355.xxxxxx Standard capacity:80055.xxxxxx High Capacity: 80255.xxxxxx ac Pre Pleat 40 filters are available in a wide range of sizes and will fit most commercial and industrial installations with little or no system modification. Fasteners are available to adapt the filter to existing filter banks.
Construction Filter frames are constructed from two pieces of die-cut, moisture-resistant carrier board. Components “telescope” into one another and provide double-wall construction and a precision fit. The frame includes diagonal and horizontal support members bonded to the media on the air entering and leaving sides for unsurpassed frame strength. Locking corners and positive media-to-frame seal reduces the possibility of air bypass.
Performance Data Capacities and Dimensions Standard Capacity cfm PD cfm PD Media Wt. Area Each sq. ft. (lbs.) x x x x x x x x x x x x x x x 10 20 20 24 20 25 20 20 25 20 24 25 24 25 24 x x x x x x x x x x x x x x x 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 210 417 500 600 583 729 625 667 834 834 900 945 1000 1042 1200 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 347 694 833 1000 972 1215 1042 1110 1390 1390 1500 1575 1667 1735 2000 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.
The Pre Pleat Series of Pleated Air filters st or e Pre Pleat Class 1 air filters are designed for applications where a UL Class 1 fire rated filter is required and metal frames are unsuitable. hv ac Pre Pleat HT air filters are designed for applications where the temperatures reach up to 400ºF. te ra nd 62R high efficiency pleated air filters contain an electrostatically charged filtration media which has a higher dust holding capacity. 1.
Pre Pleat HV High Velocity and Gas Turbine Pleat st or e Models 85455.xxxxxx General ac The Pre Pleat HV pleated filter from Flanders is designed to operate in high velocity and turbulent air applications where standard pleated filters have a tendency to fail. Construction te ra nd A heavy-duty die-cut moisture resistant frame encloses the media pack. The media is manufactured of 100% electrostatically charged synthetic fibers that attract and hold airborne particulate contaminants.
PD x x x x x x x x x x x x x x x x 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 210 417 500 600 583 729 625 667 834 834 900 945 1000 1042 1200 417 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.13 347 694 833 1000 972 1215 1042 1110 1390 1390 1500 1575 1667 1735 2000 694 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.29 1.6 3.2 3.8 4.5 4.5 5.3 4.8 4.8 6.1 6.1 6.9 7.2 7.7 7.6 8.9 6.
Pre Pleat 62R High Efficiency Pleated Filters or e Standard Capacity: 85655.xxxxxx High Capacity: 85755.xxxxxx Minimum Efficiency By Particle Size 100% st 90% Filtration for IAQ Flanders Pre Pleat 62R pleated panel air filter was specifically designed to improve indoor air quality through a new level of particulate filtration. The filter takes its name from the ASHRAE Standard 62 which addresses indoor air quality. The Pre Pleat 62R is indeed state of the art.
Pre Pleat 62RM11 NEW or e Standard Capacity: 85655.xxxxxxM11 High Capacity: 85755.xxxxxxM11 (Merv 11 (60-65% per Ashrae 52.1-1992) st Pre Pleat 62RM11 Ultra High Efficiency Pleated Filters re Pleat 62RM11 pleated panel filter enables a significant upgrade in collection efficiency over existing MERV 8 products at the same resistance levels. From 30-35% to 60-65% average per Ashrae 52.1-1992 average dust spot efficiency at nearly the same pricing levels.
Electrostatically charged synthetic filtering media Filter pack sealed in frame at every point of contact. or e Telescoping frame gives double perimeter thickness Corosion resistant heavy metal backing st Diagonal face strips for extra strength High efficiency and arrestance at low pressure drop V-wedge pleats for full media usage hv ac UL Class II nd PrePleat 62RM11 PrePleat 62R te ra PrePleat 40 1.0 General Guide Specifications fil 1.
Pre Pleat Class 1 UL 900 Class 1 Pleated Filter or e Standard Capacity: 85855.xxxxxx High Capacity: 85955.xxxxxx Construction This pleated air filter is designed for applications where a UL Class 1 fire rated filter is required and metal frame filters are unsuitable because of disposal problems.
or e Rate of Air Flow vs Initial Resistance Arrestance vs. Dust Fed 100% 90% 1.25 80% 1.00 0.75 0.50 70% 60% 50% 40% 30% st Arrestance (%) Resistance (Inches w.g.) 1.50 20% 0.25 10% 0% 0 0 1000 1500 2000 2500 25 40 55 Air Flow - CFM 85 100 1.75 Resistance (Inches w.g.) 90% 80% 60% 50% 40% 30% 20% 10% 1.25 Resistance vs. Dust Fed hv 70% 1.50 ac Efficiency vs. Dust Fed 100% Dust Spot Efficiency 70 Dust Fed (grams) 1.00 0.75 0.50 0.25 0.
Pre Pleat HT High Temperature Pleated Filters or e Standard Capacity: 84555.xxxxxx High Capacity: 84655.xxxxxx Up to 400oF resistant metal face screen on the downstream side to increase pack rigidity while preventing blowouts. Flanders Pre Pleat HT filters are designed for increased air filtration efficiencies in an operating environment where temperatures reach 400 degrees Fahrenheit Typical examples include air intakes for drying ovens or high temperature baking applications.
Rate of Air Flow vs Initial Resistance 90% 1.25 80% Arrestance (%) 1.00 0.75 0.50 70% 60% 50% 40% 30% 20% 0.25 10% st Resistance (Inches w.g.) or e Arrestance vs. Dust Fed 100% 1.50 0% 0 0 1000 1500 2000 2500 25 40 55 Air Flow - CFM 85 100 1.75 Resistance (Inches w.g.) 1.25 1.00 0.50 0.25 1.25 1.00 0.75 hv 0.75 1.50 Resistance vs. Dust Fed ac Rate of Air Flow vs Initial Resistance 1.50 Resistance (Inches w.g.) 70 Dust Fed (grams) 0.50 0.25 0.
E35 or e Pleated Panel Filters Models E35-xxxxx Installation Considerations Flanders E35 extended surface pleated filters are designed to operate in most installations. Available in 1”, 2”, and 4” nominal thickness, these filters have an average atmospheric dust spot efficiency range of 25-30% per ASHRAE Standard 52.1 test methods. E35 filters offer greater efficiency and service life than disposable filters, pad and frame systems, or metal washable filters.
CAPACITIES AND DIMENSIONS Nominal Size HxWxD (inch) cfm PD cfm PD Media Area (sq.
Superflow-V or e Extended Surface Minipleat Filters DOP: 95%: SFV D95xxxx ASHRAE 98% SFV98xxxx ASHRAE 95% SFV95xxxx 85% SF85xxxx 75% SFV75xxxx Construction Lowest Pressure Drop st The ratio of media area to nominal face area of Superflow-V filters is an extremely high 48:1, resulting in a much longer service life than most any filter of comparable efficiency and depth. Longer service life means material and labor cost savings and less disruption of systems caused by filter change-out shutdowns.
Model Number Nominal Size HxWxD Inches 250 FPM 375 FPM CFM PD CFM PD 500 FPM CFM PD 625 FPM CFM PD 95% DOP 95% DOP 95% DOP SFVD-95A12 SFVD-95B12 SFVD-95C12 24 x 24 x 12 20 x 24 x 12 12 x 24 x 12 1000 800 500 0.28 0.28 0.28 1500 1200 750 0.55 2000 0.75 0.55 1600 0.75 0.55 1000 0.75 2500 0.80 2000 0.80 1250 0.80 98% 98% 98% SFV-98A12 SFV-98B12 SFV-98C12 24 x 24 x 12 20 x 24 x 12 12 x 24 x 12 1000 800 500 0.25 0.25 0.25 1500 1200 750 0.45 2000 0.60 0.45 1600 0.60 0.45 1000 0.
Rigid-Air Fiberglass or Synthetic Media Rigid Filter They feature your selection of media backed with expanded metal and pleated. The pleats are held in place by rigid pleat separators, now available in either plastic or metal styles. Rigid-Air is available in two media types: lofted fiberglass and micro-fine synthetic with average efficiency ranges of 50-55%, 60-65%, 80-85% and 90-95% per ASHRAE Standard 52.1 test methods. st Physical Data Frame: 24 ga.
Rigid-Air Box Type Filters 60-65% 50-55% 90-95% 6 80-85% 60-65% 50-55% or e 80-85% 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 100 500 .24 1500 .44 2000 .66 2500 .90 .20 .13 .10 .45 .35 .25 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 .34 .24 .20 .72 .13 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 1250 .51 2500 .70 1250 .36 2500 .49 1250 .30 2500 .41 1250 1.00 Note 3 .84 Note 3 .60 Note 3 .35 2500 .
Rigid-Air Filters with Header 60-65% 50-55% 90-95% 80-85% 6 60-65% 50-55% 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 PD cfm .36 1500 750 .25 1500 750 .15 1500 750 .11 1500 750 .50 1500 750 .42 1500 750 .27 1500 750 .11 1500 750 PD 500 cfm cfm PD .60 2000 1000 .44 2000 1000 .27 2000 1000 .22 2000 1000 .81 2000 1000 .68 2000 1000 .45 2000 1000 .24 2000 1000 .87 .65 .41 Media Weight Area Each cfm PD (sq. ft.) (lbs.) 2500 1.16 50 20 1250 12 22 2500 .
Hospital Applications Rigid-Air filters may be used wherever job requirements and available space will accommodate 6” or 12” deep filters. Rigid-Air filters may be used on the downstream side of the supply fan in hospitals if they are far enough from the fan so that the high fan discharge velocity will not affect them. Rigid-Air rigid filters can withstand adverse air flow conditions better than bag filters and are the preferred selection for these applications.
PrecisionCell Extended Media Separator Type Rigid Filters or e UL Class 1, Std & Hi Cap: 8*055.xxxxxxx1, 87*55.xxxxxx1 UL Class 2, Std & Hi Cap: 8*055.xxxxxx, 87*55.xxxxxx (Insert 6 for 65%, 8 for 85%, 9 for 95% ASHRAE Efficiency) These filters are suitable for variable air volume systems. Operating face velocity ranges are from 0 to 625 FPM for 12” deep filters. Three styles are available: box, single and double header. PrecisionCell filters are UL 900 Class 1 listed.
Performance Data PrecisionCell Standard Capacity Filters With Single or Double Header 80-85% 60-65% 90-95% 80-85% 6 60-65% 375 fpm 500 fpm 625 fpm cfm PD cfm PD cfm PD cfm PD 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 .25 1500 750 .20 1500 750 .15 1500 750 .45 1500 750 1500 .35 750 .15 1500 750 .40 2000 .68 1000 .35 2000 .57 1000 .20 2000 .42 1000 .65 Note 3 2500 .78 1250 2500 .67 1250 2500 .52 1250 Media Area (sq. ft.) Weight Each (lbs.
or e st ac ra nd hv PrecisionCell Single Header filters are recommended for through-the-frame applications. Install by loading the filters through the Type 9 frame until the header comes into contact with the gasket on the frame. Secure in place with Model P fasteners. th e fil te PrecisionCell Single Header filters are ideally suited for upstream or downstream installation in KTrac Filter Modules. Insert the horizontal sides of the header in the gasketed 1” secondary track of the framing system.
VAV Systems PrecisionCell filters may be used wherever job requirements dictate totally rigid filters and available space will allow only minimal inline depth. Filter banks should be sized so that the maximum rated flow at design conditions falls within the published recommended velocities. PrecisionCell filters may be applied at any capacity between zero flow and cataloged capacities.
PrecisionCell HT High Temperature Rigid Filters They are ideal for paint drying ovens or any application requiring high efficiency filtration at high temperatures. PrecisionCell HT filters are offered in two high temperature operating ranges; 750o F and 900o F and efficiency ranges of 65%, 85% and 95% per ASHRAE Standard 52.1. Construction st ac PrecisionCell HT filters are designed for high temperature applications up to 900o F. They feature the same rugged construction as the standard PrecisionCell.
60-65% 900 750 80-85% 900 750 90-95% 900 x x x x x x x x x x x x 24 12 24 12 24 12 24 12 24 12 24 12 x x x x x x x x x x x x 12 12 12 12 12 12 12 12 12 12 12 12 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 2000 1000 .35 .30 .55 .50 .60 .55 Weight Each (lbs) 140 69 175 90 140 69 175 90 140 69 175 90 26 21 28 22 26 21 28 22 26 21 28 22 ac 24 24 24 24 24 24 24 24 24 24 24 24 750 Media Area (sq. ft.
PrecisionCell GT Gas Turbine Rigid Filters The PrecisionCell GT features heavy-duty construction to meet the rigorous demands of gas turbine rotary machinery air filtration applications. They may also be utilized where extreme velocity or turbulence have rendered other products to be ineffective. PrecisionCell GT filters are available in ASHRAE efficiencies of 60-65% and 90-95% in either single or double header versions.
65% 12 95% 250 fpm cfm 24x24x12 1000 24x12x12 500 24x24x12 1000 24x12x12 500 pd .15 .25 375 fpm cfm 1500 750 1500 750 pd .25 .45 500 fpm cfm 2000 1000 2000 100 625 fpm pd .35 .65 cfm 2500 1250 2500 1250 Notes: Weight Each (lbs.) .40 .78 140 26 69 21 140 30 69 25 ac PD represents clean pressure drop in inchw.g. The recommended final pressure drop is 2.5 inch w.g. Operation down to zero velocity is satisfactory for all models.
PrecisionCell II Extended Surface Mini Pleat In-Line Space-Saving Design PrecisionCell II filters are especially suitable for variable air volume systems and are designed to operate at face velocities up to 625 fpm. Two styles are available: standard box style and an optional headered (top and bottom) version that are manufactured with a header for use with existing side access housings (see Optional Model). PrecisionCell II filters are UL 900 Class 2 listed.
Construction ra nd hv ac st or e In the Flanders tradition of state-of-the-art technology, PrecisionCell II filters are built with a minipleat media pack to achieve a rugged, compact lightweight, high efficiency filter. Surepleat Side Access Housings te Use a Surepleat Side Access Housing as a convenient and space-saving method of installing PrecisionCell II filters. SP2/4 housings have two gasketed extruded aluminum tracks to accept 2” pleated prefilters and 4” PrecisionCell II final filters.
VAV Systems Prefilters are always a wise choice for the protection of minipleat filters no matter what the efficiency or brand. The closely-spaced pleats are subject to face-loading (bridging) by lint and coarse particles, thus reducing their usual long life. A minimum 2530% ASHRAE efficiency pleated panel filter such as the Flanders Prepleat 40 is recommended. Filter banks should be sized so that the face velocity at maximum design conditions is 625 fpm or less.
Capacities and Dimensions 80-85% 60-65% x x x x x x 24 12 24 12 24 12 x x x x x x 4 4 4 4 4 4 250 fpm 375 fpm cfm cfm 500 fpm cfm PD 500 250 500 250 500 250 .11 1000 26 1500 .42 2000 .68 .11 500 .26 750 .42 1000 .68 .08 1000 .21 1500 .36 2000 .58 .08 500 .21 750 .36 1000 .58 .06 1000 .13 1500 .25 2000 .40 .06 500 .13 750 .25 1000 .40 PD PD cfm PD 625 fpm Media Weight Area Each (sq. ft.) (lbs.) cfm PD 2500 1250 2500 1250 2500 1250 or e 24 24 24 24 24 24 90-95% 125 fpm .95 .95 .
EA Cartridge Medium-High Efficiency Replacement Filters ASHRAE 55%: EA-55xx ASHRAE 95%: EA-95xx or e ASHRAE 30%: EA-30xx ASHRAE 85%: EA-85xx Application EA Series Replacement Air Filters are pre-formed, extended surface deep-pleated cartridges for use with existing hardware in commercial and industrial HVAC systems. EA Series filters are available in average efficiency ranges of 25-30%, 50-55%, 8085% and 90-95% when tested according to ASHRAE Standard 52.1 methods.
50-55 80-85 x x x x x x x x x x x x x x x x x x x x x x x x x x x x High cfm 8 8 8 8 8 12 12 8 8 8 8 8 12 12 8 8 8 8 8 12 12 8 8 8 8 8 12 12 600 750 900 950 1000 800 1500 550 600 700 800 900 600 1000 400 400 400 500 600 600 1000 350 400 400 450 500 450 900 1000 1250 1500 1750 2000 1200 2500 800 1000 1100 1250 1500 1000 2000 600 700 800 1000 1200 1000 2000 500 600 800 850 1000 750 1500 .10 .10 .10 .10 .10 .10 .10 .12 .12 .12 .12 .12 .12 .12 .25 .25 .25 .25 .25 .25 .25 .30 .30 .30 .30 .30 .30 .30 .
Precision Pak Extended Surface Bag Filters Precision Pak filters are UL 900 Class 2 listed as a standard and are also available in UL Class l. Physical Data Media: Lofted fiberglass or micro-fine synthetic Media Backer: Non-woven polyester Pocket Sealant: Thermoplastic resin Pocket Retainer: 26 ga. corrosion-resistant steel Header: 11/26” wide 26 ga. corrosion-resistant steel Operating Limits: 100% RH and 190° F Actual Header Face Size: Nominal size less 5/8” (e.g.
Number of Pockets 15 15 22 22 22 22 22 22 30 30 30 30 30 30 36 36 36 36 12 6 6 3 8 4 10 5 6 3 8 4 10 5 6 3 fil e 8 4 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 1500 750 0.30 0.30 0.32 0.32 0.24 0.24 0.22 0.22 0.30 0.30 0.22 0.22 0.20 0.20 0.27 0.27 0.20 0.
Number of Pockets 15 15 22 22 22 22 22 22 30 30 30 30 30 30 36 36 36 36 12 6 6 3 8 4 10 5 6 3 8 4 10 5 6 3 8 4 0.18 0.18 0.19 0.19 0.16 0.16 0.15 0.15 0.16 0.16 0.14 0.14 0.14 0.14 0.15 0.15 0.14 0.
or e Application Guidelines Gasketed Headers Properly selected bag filters without prefilters will generally require changeout annually in typical HVAC applications. Because of the frequent maintenance expense and increase in fan kW input using prefilters, they are often recommended with 85% and 95% efficient Precision Pak final filters. However, the energy cost to operate a prefilter seldom warrants their use with 55% or 65% filters.
Precision Pak XDH or e High Dust Holding Capacity Extended Surface Bag Filter Models XDHxx**Sxxxx (** insert 50, 65, 85 or 95 for ASHRAE efficiency) Kimberly-Clark Media st A typical XDH bag filter was tested for ASHRAE synthetic dust holding capacity against similar filters with fiberglass and meltblown synthetic media. Results showed that the XDH filter held approximately 110% more dust by weight than the others when run to the same final resistance.
12 12 22 22 22 22 22 22 26 26 26 26 26 26 30 30 30 30 30 30 12 6 6 3 8 4 10 5 6 3 8 4 10 5 6 3 8 4 10 5 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 fil e th 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 ra Number of Pockets 0.26 0.26 0.24 0.24 0.21 0.21 0.20 0.20 0.23 0.23 0.20 0.20 0.17 0.17 0.22 0.22 0.18 0.18 0.14 0.
Installation Considerations Precision Pak bag filters may be installed in Flanders Type 9 Holding Frames, K-Trac Filter Framing Modules, Sureseal Side Access Housing or in similar existing hardware. Type 9 Holding Frames are riveted together to form a bank and may be installed for upstream or downstream service. K-Trac Filter Framing Modules are especially suitable for medium to large built-up filter banks.
Gasketed Headers Precision Pak XDH filters should be selected using 24” x 12” and 24” x 24” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement filters will be readily available. Precision Pak XDH filters installed in Flanders KTrac Filter Framing Modules or Sureseal Side Access Housings require polyfoam gaskets on opposite header sides to prevent air bypass.
MS/MSG Moisture/Oil Mist Separators or e MS Models: MS-xxxxx MSG Models: MSG-xxxxx Installation Considerations Flanders models MS and MSG Moisture Separators are designed for use in air handling systems requiring collection of water droplets or oil mist. Water droplets in outside air are usually fog. In supply air, water droplets may occur as carry over from cooling coils and evaporative media or unevaporated moisture downstream of humidifiers.
Construction Moisture separators are constructed much like permanent metal washable filters. The nominal two inch thick media pack consists of 15 individual layers of pleated and flat aluminum wire mesh. or e Air entering and exiting support grids are expanded metal, and the media enclosing frame is 16 ga. galvanized steel with five 3/8” diameter holes in the bottom for drainage.
KKM Washable Permanent Filters or e Galvanized frame: 50055.xxxxxx Aluminum Frame: 51255.xxxxxx The KKM offers large filtering area, high dust holding capacity, uniform loading and low resistance to air flow. It is recommended that the filter media be coated with dust adhesive for optimum performance. st Flanders Model KKM is a heavy duty, washable, aluminum media, all metal filter. KKM is suitable for all residential and commercial applications.
or e Standard KKM with Steel Frame Actual Size HxWxD Quantity per Carton Carton Weight (lbs) 10 x 20 x 1 9-3/4 x 19-3/4 x 7/8 1 1.7 15 x 20 x 1 14-3/4 x 19-3/4 x 7/8 1 2.5 16 x 20 x 1 15-5/8 x 19-5/8 x 7/8 1 2.
Alpha 95 95% DOP Filter Alpha 95 Filters are 97% efficient on nebulized staphylococcus aerosols and are used to remove biological contaminants. Alpha 95 Filters are identical in design and construction to the Alpha Cell HEPA Filters except that the media is 95% efficient on 0.30 micrometer particles. st Typical • • • • • • • • • • • nd Installation Considerations Standard Alpha 95 Filters have 1.7 times the cfm capacity of standard Alpha Cell 99.97% DOP HEPA Filters at the same clean pressure drop.
Alpha 95 Filter Dimensions and Capacities Actual Face Size (Inches CFM Capacity at Clean Pressure Drop, Inches w.g. .90 1.45 1.
Frame Materials Alpha 95 Filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. or e Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter. The standard Fluid Seal is Flanders Blu-Jel® Seal which is a two - part silicone material suitable for temperatures up to 390°F.
or e st ac hv nd ra Guide Specifications 1.0 General 1.1 Alpha 95 filters shall be extended media (separator type) (Pureform separatorless type) filters as manufactured by Flanders. te 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. fil 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. 2.0 Filter Construction th e 2.
Alpha Cell HEPA Filters Testing Flanders individually tests and certifies each Alpha Cell HEPA Filter to meet the customer’s requirements for resistance and efficiency (penetration) at the filters nominal rated capacity. This information appears on a test label affixed to the filter. When used with correctly selected and installed mounting frames or housings, Flanders Alpha Cell HEPA Filters will easily pass an in-place validation test to determine the overall system efficiency.
Alpha Cell HEPA Filter Dimensions and Capacities CFM Dimensions and Capacities 650 300 615 275 830 135 325 145 25 70 305 270 410 505 680 860 1035 525 640 865 1090 1315 790 1050 1315 1580 1000 455 945 425 1275 205 500 225 35 105 470 415 635 775 1045 1320 1590 810 985 1330 1680 2025 1215 1620 2025 2430 1300 590 1235 550 1655 265 650 295 45 135 610 540 825 1010 1360 1715 2065 1055 1280 1730 2185 2630 1580 2105 2630 3160 th e fil te ra Flanders manufactures both conventional Separator Style and Purefor
Frame Materials AlphaCell Filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. or e Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter. The standard Fluid Seal is Flanders Blu-Jel® Seal which is a two-part silicone material suitable for temperatures up to 390°F.
or e st ac hv nd Guide Specifications 1.0 General ra 1.1 Alpha Cell HEPA filters shall be extended media (separator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 2.0 Filter Construction te 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. e fil 2.
Alpha 2000 High Capacity HEPA Filters High Capacity Design retardant urethane elastomer to provide a rigid leak-free assembly. The Alpha 2000 High Capacity HEPA filter is available in a nominal 12” depth configuration. It is designed for optimum performance and low operating costs in both new and replacement systems. With 40% more media area than the standard capacity Alpha Cell filter, the Alpha 2000 saves space, energy, and material and labor costs.
Alpha 2000 HEPA Filter Dimensions and Capacities Actual Face Size (Inches CFM Capacity at Clean Pressure Drop, Inches w.g. .90 1.45 1.
Frame Materials Gasket and Fluid Seal or e Alpha 2000 Filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter. The standard Fluid Seal is Flanders Blu-Jel® Seal which is a two - part silicone material suitable for temperatures up to 390°F.
or e st ac hv nd Guide Specifications 1.0General ra 1.1 Alpha Cell HEPA filters shall be extended media (separator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. te 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed. 2.0 Filter Construction e fil 2.
Alpha HT High Temperature HEPA Filters General or e See component chart on next page. Sealant Types Two types of sealants for high-temperature HEPA filters are offered. Silicone Sealant ac This is a high temperature (RTV) silastic-sealant silicone compound rated for continuous service up to 500°F(260°C). NOTE: This high-temperature sealant is not UL 586 approved. HEPA Filters The glass pack seal is rated for continuous service up to 1,000°F(540°C) in exhaust air applications only.
or e st ac hv nd Guide Specifications 3.0 Performance 1.0 General 1.1 High temperature separator style HEPA filters shall be Alpha HT models as manufactured by Flanders. 2.0 Filter Construction ra 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. te 2.1 The filter pack shall be constructed by pleating a continuous sheet of non-woven water-resistant fiberglass media around hemmed-edge corrugated aluminum separators. fil 2.
Superflow 2K ® High Velocity HEPA Filter or e 20 Gauge Galvaneal: SF2K-8-G*-** 0.063” Aluminun: SF2K-5-G*-** 20 Gauge 304 Stainless: SF2K-3-G*-** (Where * indicates gasket location and ** designates size. See price book) Product Options Flanders Superflow 2K is a V-bed HEPA filter (99.99% at 0.30 micrometer) specifically designed for high airflow applications requiring HEPA efficiency at an ultra low pressure drop.
Superflow 2K Performance or e The Superflow 2K filters offer HEPA efficiency at an ultra low pressure drop for HVAC systems supplying air to critical areas. Figure 1 illustrates the Superflow 2K pressure drop as a function of air flow rate for gasket seal and gel seal designs. Superflow 2K Selection st All products have a rated overall efficiency of 99.99% at 0.30 µm and a maximum pressure drop of 1.0 inch w.g. at the rated flow.
Alpha Panel Minipleat HEPA/ULPA Filters or e Models AP*-xxxx (Where * indicates efficiecy designator of 493 for 99.99% efficient on 0.30 micron particles or 591 for 99.995% efficient on 0.12 micron particles.) General st Media: Moisture-resistant microfine fiberglass Filter pack: 2.
3” depth, Performance Data - Capacities and Dimensions 99.99% on 0.30 Fm H W 70 90 110 AP493-2424* 24 24 280 360 440 AP493-2448* 24 48 560 720 880 .35 .45 .55 Clean Filter Resistance (inch 99.99% on 0.12 Fm AP591-2424* 24 24 280 360 440 AP591-2448* 24 48 560 720 880 .50 .65 .
Pureflo Terminal HEPA/ULPA Filter Modules or e 99.99% on .3 microns: Models: PF†-493-xxxx-* 99.9995% on .12 microns, Models: PF†591-xxxx-* (Where † is pack depth designator and • is collar diameter. See price book.) Construction Flanders Pureflo Terminal HEPA/ULPA Filter Modules are lightweight low profile ducted units. The mini-pleat filter packs are designed to provide unidirectional airflow from tee-bar ceilings.
Cfm Capacity at Gross Face Velocity, Fpm Actual Length L (inches) PF†-493-2424-* 23-5/8 99.99 on PF†-493-2448-* 47-5/8 0.30 µm Clean Filter Filter Resistance(inchw.g) PF†-591-2424-* 23-5/8 99.9995 on PF†-591-2448-* 47-5/8 0.12 µm Clean Filter Resistance(“w.g) † Insert filter pack depth in mm: 53, 70, or 100 PF53 70 280 560 .40 280 560 .55 Physical Data Notes: 90 360 720 .50 360 720 .70 PF70 110 440 880 .60 440 880 .85 70 280 560 .33 280 560 .45 5. Installed weight: 2424: 1.
Pureflo-FPM Fan-Powered Terminal Filter Modules Options Nominal 10” or 12” duct collars for conditioned air UL Class 1 dimple pleat HEPA filter 25-30% efficient pleated prefilter Power cord for 115V modules 220V 50/60 Hz fan motor 277V 60 Hz fan motor Integral dual polarity DC air ionizing bar Neoprene Gasketed RSR filter pack Power indicator light st Pureflo-FPM modules produce HEPA or ULPA filtered air at a velocity of 90 fpm + 15 fpm six inches below the filter face.
Standard Replaceable Module Model Number PF-FPM-493-2424-RSR PF-FPM-493-2424-STD PF-FPM-493-2448-RSR PF-FPM-591-2424-RSR PF-FPM-591-2448-RSR Top Bottom Nominal Air Qty., Cfm (Note 1) 23.87 23.63 360 1.68 PF-FPM-493-2448-STD 0.3 Fm 47.87 47.63 720 2.04 PF-FPM-591-2424-STD 99.9995 23.87 23.63 360 1.89 PF-FPM-591-2448-STD 0.12Fm 47.87 47.63 720 2.11 Particle inches Size Efficiency, Module Module % 99.99 Typical 115V Running Amps Sensible Max. Avail. Static Press.
FCP Carbon Pleat Activated Carbon Adsorbers Product Design The FCP Series is available in standard capacity and high capacity models in 2” and 4” depths. 200 Series - Standard Capacity The filter media has a carbon mass loading of 7 oz. per sq. yd. of material. 300 Series - High Capacity The filter media has a carbon mass loading of 14 oz. per sq. yd. of material.
FCP Selection Nominal Size (inches) Actual Size (inches) Media Area (sq. ft.) FCP201-24242 24 x 24 x 2 23-3/8 x 23-3/8 x 1-3/4 20 2000 .55 FCP201-12242 12 x 24 x 2 11-3/8 x 23-3/8 x 1-3/4 10 1000 .55 FCP301-24242 24 x 24 x 2 23-3/8 x 23-3/8 x 1-3/4 20 2000 .65 FCP301-12242 12 x 24 x 2 11-3/8 x 23-3/8 x 1-3/4 10 1000 .65 FCP201-24244 24 x 24 x 4 23-3/8 x 23-3/8 x 3-3/4 44 2000 .40 FCP201-12244 12 x 24 x 4 11-3/8 x 23-3/8 x 3-3/4 21 1000 .
PH Odor Control Gas Phase Odor Control Air Filters Examples of applications that might benefit from such a filter include family residences, hotel rooms, nursing facilities, athletic clubs and other areas with odors that come from strong acids or strong bases. Construction Cotton and polyester pleat media is prepared by immersion in a special sodium bicarbonate slurry, then dried. Media is adhered to galvanized expanded metal and deep pleated.
Sensory testing Urine Odor or e st The filter media shall be manufactured using fine grain sodium bicarbonate (baking soda) at a rate of 2 grams per square foot of media. The baking soda will be uniform through the thickness of the media. A majority of individual media fibers will be coated with the fine-grained baking soda. The sodium bicarbonate coating will be adhered to the fibers. Proof of fiber coating and uniformity through the media is to be given in the form of electron microscopic photographs.
Model C 50% Fill, models: C50-xxxxx st The carbon is retained within the honeycomb cells by a non-woven nylon mesh on both sides of the filter. The honeycomb is given additional strength by a moisture-resistant die-cut beverage board frame (standard sizes) or U-channel beverage board (special sizes). Each order is individually sealed in plastic to retain the carbon efficiency prior to installation.
Standard Size Capacities and Dimensions 1-3/4 C75 11-1/2 x 23-1/2 600 2.00 2.75 15-1/2 x 19-1/2 660 2.25 3.00 15-1/2 x 24-1/2 830 2.75 3.75 19-1/2 x 19-1/2 830 2.75 3.75 19-1/2 x 24-1/2 1040 3.25 4.75 23-1/2 x 23-1/2 1200 4.00 5.50 11-1/2 x 23-1/2 600 4.00 5.50 15-1/2 x 19-1/2 660 4.50 6.00 15-1/2 x 24-1/2 830 5.50 7.50 19-1/2 x 19-1/2 830 5.50 7.50 19-1/2 x 24-1/2 1040 6.50 9.50 23-1/2 x 23-1/2 1200 8.00 11.
Superflow-VC Disposable Carbon Adsorber Construction st Physical Data Top and bottom end plates: High strength ABS plastic Vertical struts: Aerodynamically-designed extruded aluminum Vertical supports: Steel rods on downstream side Carbon panels: Eight one inch (25 mm) moisture resistant corrugated kraft honeycomb grids filled with granular activated carbon media contained by fine mesh nylon screens on both air entering and leaving sides nd Superflow-VC Adsorbers consist of eight activated carbon-fil
Superflow-VC Adsorbers in HVAC airstreams can remove many gaseous contaminants thus mitigating their effects on people and processes. They are especially useful in controlling common contaminants that cause poor indoor air quality (IAQ) in commercial and industrial buildings such as office buildings and hospitals.
Physical Data: Each Superflow-VC Adsorber is individually sealed in a polyethylene bag prior to placement in a heavy duty shipping carton. The bag protects the adsorber from being expended prematurely and also facilitates clean and easy jobsite changeouts. The spent adsorber can be placed in the plastic bag and then in the carton for disposal.
Superflow-VC Performance Data ADSORBER FACE VELOCITY, fpm 250 375 Adsorber Nominal Size Model Number H x W x D (See Note 1) inch (See Note 2) cfm PD Res SFVC-242412 500 0.10 0.11 1000 0.20 0.050 1500 0.33 0.040 2000 0.50 0.030 34 250 0.10 0.11 17 cfm PD Res cfm PD Res cfm 24 x 24 x 12 Adsorber Nominal Size Model Number H x W x D mm. (See Note 1) (See Note 2) 0.64 m3/s PD 500 0.20 0.050 750 PD Res m3/s Res 0.33 0.040 1000 0.50 0.030 ADSORBER FACE VELOCITY, m/s 1.27 1.
Vaporclean Vapor Phase Air Filter or e Models VC-xxxx-xx-xx-xxxx-xx See price book Product Options The Flanders Vaporclean vapor phase adsorbers are designed for removal of molecular contaminants at low concentration levels while utilizing the proven technology of dry processed carbon composite media, (DPCC). The adsorbers provide high efficiency removal of multiple contaminants for applications within museums, archive storage facilities, airports and semiconductor fabrication facilities.
Vaporclean Performance The pressure drop of the Vaporclean is 0.35 inch w.g. at a face velocity of 500 fpm. The initial efficiency of the adsorber under the following conditions shall be met. Challenge Concentration Efficiency Capacity @ 50% Efficiency 25 ppm 30 ppm 5 ppm 500 ppb >90% >90% >70% >80% 560 grams 60 grams 100 grams 4 grams st Toluene SO2 NO2 Formaldehyde or e Contaminant ac Contaminant Matching Match the Vaporclean media type to the contaminant of concern.
HMZD High Mass and Zero Dust Bonded Carbon Panels or e Models HMZD-*-xxxxxxx-xx (Where * represents carbon type: 201, 202, 204, 205, 209, 225 See price book for complete model designation) Carbon Selection HMZD carbon panels are available from 3/8” to 3” depths, and are easily installed in any existing side or front access housing without the usual clean up caused by carbon dusting. Bonded panels do not need to be refilled, thus eliminating the labor associated with transporting trays.
Pressure Drop or e HMZD Panels can be incorporated into V shaped configurations with minimal pressure drop and impact on the system. ac st Please note that the breakthrough test was based on continuous 100 ppm Hexane challenge concentration. Testing conducted at an independent lab on virgin coconut shell carbon.
Clean Air is Only a Block Away or e Flanders, through innovative technology, has resolved the problems associated with loose filled activated carbon trays by introducing HMZD bonded carbon panels. st HMZD stands for High Mass and Zero Dust. High Mass refers to the greater density of activated carbon installed in each panel, and Zero Dust means the filters will not release carbon dust into the air stream.
Guide Specifications 5.0 Carbon Material 1.1 Molecular contamination control filters shall be Flanders High Mass and Zero Dust (HMZD) bonded carbonpanels. Panels shall be self-supported bonded granular carbon and be sized to fit into the selected Flanders Pureseal front or side access housing as well as competitive carbon systems. Model numbers shall be as per schedule for application specific requirements. 5.
Techsorb or e Chemical Media for Gaseous Contaminant Removal Models TS-*-B1 (Where * indicates chemical media designator. See price book.) Shelf Life Media Types and Applications Techsorb TS-101 is a dry, activated alumina medi- ra um, designed to be used in applications for the removal of gaseous vapors such as hydrogen sulfide, mercaptans, sulfur dioxide and other malodorous and corrosive contaminants.
TECHSORB TS-205 has been used extensively in Odor Control applications. The primary applications are for odor and contamination control associated with aldehydes and acrolein.
Type 9 Filter Holding Frames and Fasteners or e Models 9HF-xxxxx Fasteners Flanders Type 9 Holding Frames are used to construct built-up filter banks for upstream or downstream access using ASHRAE rated filters. Type 9 frames will accommodate 1”, 2” or 4” panel filters including metal washable filters. They are also suitable for bag filters, self-supporting rigid filters and disposable type carbon elements. A filter-to-frame seal is effected by a factory-installed gasket and positive-sealing fasteners.
Fastener Selection Chart Number Per Frame Length (inch) Filter Usage Upstream Service Downstream Service 4 4 1 2 1” panel filter, Precision Pak, PrecisionCell, or Rigid-Air 2” panel filter 2 2 P-3 P-4 3 4 2” panel prefilter with Precision Pak, PrecisionCell, or Rigid-Air 4” panel filter, PrecisionCell II 2 2 P-5 P-6 5 6 4” panel prefilter with Precision Pak bag,PrecisionCell, or Rigid-Air 6” PrecisionCell or Rigid-Air 2 2 P-12 C-2 12 2 12” PrecisionCell, or Rigid-Air 2” panel prefilter with
Uni-Frame Media Holding Frame or e Models 80955.xxxxxx Installation Uni-Frames are designed for retaining air filter media pads in applications that require additional media support. Typical applications include roof top units, spray booths, residential units, unit ventilators and other applications not suited for ordinary fiberglass throwaway filters because of airflow velocity or environmental considerations Standard Sizes ac Guide Specifications 1.0 General 1.
K-Trac Modular Filter Framing System or e See model number development method on next page. Construction K-Trac Filter Framing Modules are used for ASHRAE rated filters 2” to 36” in depth. K-Trac Modules are complete factory-designed units which replace multiple field-erected holding frames. They also provide inherent structural strength and leakproof assembly that is sometimes lacking in frametype installations. K-Trac framing members are constructed of Type 6063-T5 mill-finish extruded aluminum.
Height CodeOverall Height (inch)Width Code 36-15/16 20H 48-13/16 25H 61-1/4 30H 73-1/8 35H 85-9/16 40H 97-7/16 45H 109-7/8 50H 121-3/4 55H 134-3/16 60H 146-1/16 35W 40W 45W Overall Width (inch) (fpm) 36-1/26 48-1/16 59-7/16 71-7/16 82-13/16 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 375 500 625 2250 3000 3750 3000 4000 5000 4500 6000 7500 5250 7000 8750 6750 9000 11250 7500 10000 12500 9000 12000 15000 9
Installing filters and prefilters Filters with polyfoam side gasket Spring-loaded sealing levers actuate pressure bars on both the prefilter and primary filter.
or e st Precision Pak bag filter ac PrecisionCell, Superflow V, or Rigid-Air filter with a Single Header Drawing Notes hv 1. Framing members of extruded aluminum are factory-cut to exact length, pre-drilled and gasketed. 2. One vertical support for the center of the upstream side will be furnished on modules nominal 8 ft. wide. Wider modules will be furnished with vertical supports on both the upstream and downstream sides. 3.
Perma Frame or e Hard Ceiling Adaptor Frames for Terminal Modules st Models HCFA-xxxx Model Number Development General HCFA The Perma Frame is ideal for biotech facilities that require frequent wash-down of the cleanroom as well as isolation hospital rooms where HEPA type filtration is frequently required.
Construction Details Dimensional Data Actual Dimensions (inches) W HCFA 2424 26 HCFA 2448 50 Drawing Notes: IL IW 26 24 4 4 26 48 6 6 st L Weight (lbs) or e Model Number Construction-18 ga. cold rolled steel or 304 stainless steel. ac IL- inside length Guide Specifications fil te ra nd hv IW- inside width 1.0 General e 1.1 Sheet rock adaptor frame for ceiling mounted terminal modules shall be Perma Frame as manufactured by Flanders. 2.0 Frame Construction th 2.
or e Residential Air Cleaner Refills For Space Gard® , Air Bear®, Honeywell® Air Cleaners* See model numbers in chart on next page. Installation For over 50 years, Flanders air filters have been protecting cleanrooms, hospital operating rooms and other critical environments. Now, homes and businesses can benefit from their superior craftsmanship in a new line of Flanders filters.
MERV Media 8 Electrostatic Poly Blend 550AB Cartridge 10 Wet laid glass microfiber-mini pleat Water resistant kraft board 82955.052025 600SG Cartridge 8 Electrostatic Poly Blend Water resistant kraft board 82655.062025 650SG Cartridge 10 Wet laid glass microfiber-mini pleat Water resistant kraft board 650SG Inserts 10 Wet laid glass microfiber 500AB Cartridge 8 Electrostatic Poly Blend 550AB Cartridge 10 Wet laid glass microfiber-mini pleat Air Bear® Trion, Inc.
Model 500AB or e Air Cleaner Housing Model 82855.052025 Construction The Model 500AB air cleaner housing is designed for use with the Model 500AB or 550AB cartridge in an HVAC system. Both of these cartridges feature deep pleated media whose area is several times the face area of the housing. The Model 500AB air cleaner housing has a built-in prefilter track. Using a prefilter can greatly increase the useful life of a high efficiency filter such as the 500AB or 550AB cartridges.
Versatile Installation or e The Model 500AB air cleaner housing can be installed in a variety of configurations; Highboy, Lowboy, Horizontal, Upflow or Vertical Downflow. LOWBOY TYPICAL TRANSITION (VERTICAL DOWNFLOW) th e fil te ra nd hv ac st HIGHBOY UPFLOW HORIZONTAL Flanders - Foremost in Air Filtration Corporate Headquarters, St.
Airia 350 or e Electronic Room Air Cleaner Physical Data Airia 350 delivers high quality air filtration right into the living space. This compact unit is filled with the latest developments in air filtration, from high efficiency HEPA technology to state-of-the art odor control. It will purify the air in a 25’x25’ room 4 times an hour - quietly and efficiently. All of this in a footprint of under 2 square feet.
Airia 1000 and 2000 or e Whole House Electronic Air Cleaners General st Airia whole house air cleaners feature a reliable, built-in airflow sensor to cycle on and off with the central system fan. The Airia line of electronic air cleaners delivers high, instantaneous filtering efficiency in a reliable, permanent package that is built to last the life of an air handling system. Airflow resistance is low and constant. Operation costs only pennies per day.
Model DIM “A” (inches) DIM “B” (inches) DIM “C” (inches) DIM”D” (inches) AIRIA 1400 19.960 16.335 15.762 AIRIA 2000 23.960 20.335 19.762 or e 13.762 st 17.762 Primary LED Indicator Secondary LED Indicator 22.489” Power Pack On/Off Switch ac Cabinet 3.625” hv Access Door DIM “C” DIM “A” Air DIM “D” DIM “B” 1” 23.812” 26.312” nd Flow .
th e nd ra te fil ac hv st or e
th e nd ra te fil ac hv st or e
