Overview of Primary Product
V5011N TWO-WAY THREADED GLOBE VALVE
63-2548—3 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
an individual unit may not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions and
some minor differences in performance can be
expected if those conditions are changed.
Models:
V5011N Valve: Two-way threaded globe valve for steam,
water, or glycol. NPT-threaded pipe connections. Throttling
plug provides equal percentage flow characteristic for
water (V5011N1xxx, V5011N3xxx), linear flow characteris-
tic for steam (V5011N2xxx).
NOTE: V5011N1xxx and V5011N2xxx are direct acting
(stem down to close).
V5011N3xxx is reverse acting (stem up to close).
Dimensions: See Fig. 1.
Valve Sizes and Flow Capacities: See Table 1.
Pipe Connections: Internal NPT-threaded connections.
Seat: Stainless steel, replaceable (except V5011N3xxx 3/4 in.
to 1-1/4 in. which have an integral brass seat).
ANSI Body Class: 150 psi.
Stem: Stainless steel.
Plug: Brass on V5011N1xxx and V5011N3xxx for water;
stainless steel on V5011N2xxx for steam.
Stroke: 3/4 in. (20 mm).
Approximate Leakage Rate: 0.05 percent C
v
.
Pattern: 2-way, straight-through.
Body Material: Red brass.
Packing: Spring-loaded, carbon fiber reinforced PTFE V-rings.
Rangeability: 50:1 per VDI/VDE 2173.
Pressure-Temperature Ratings:
Water: 36°F to 248°F, 217 psi (15 bar).
248°F to 337°F, 185 psi (12.8 bar).
Maximum Water Differential Pressure: 230 psid (15.8 bar).
Steam: 100 psi (6.9 bar) at 337°F (V5011N2xxx).
Maximum Differential for Quiet Water Service: 20 psid.
Valve Flow Characteristics:
Water: Equal percentage (V5011N1xxx, V5011N3xxx).
Steam: Linear (V5011N2xxx). See Fig. 2.
Close-Off Pressure Ratings: See Fig. 3, and Table 2.
Valve Design Life: 250,000 full cycles at maximum rated
temperature.
Replacement Parts: See Fig. 5 and Table 3.
Motor and Linkage Selection:
Table 1. Valve Size and Flow Capacities.
Electric Pneumatic
ML6421/ML6425 MP953C (5 and 8 in.)
ML7421/ML7425 MP953E (5 and 8 in.)
ML7984/ML6984 —
Modutrol IV with Q5001 —
Damper DCA with Q5020 —
Size (in.)
Capacity (C
v
)
1/2 0.73
1.16
1.85
2.9
4.7
3/4 7.3
111.7
1-1/4 18.7
1-1/2 29.3
246.8