User's Manual

The RX2 Battery Charger 15
E-EQ-RX2OGWW-A RX2 User’s Guid
The RX2 Battery Charger
The RX2 battery charger accepts AC power input.
Figure 12 RX2 Battery Charger
The charger can be used to charger either an internal RX2 battery pack or the external battery
pack. Either type of battery pack recharges in less than six hours. The battery changer can operate
in environments from 32°F to 104°F (0°C to 40°C).
The charger has a red LED that indicates the status of the charger:
• Rapid flashing – The charger is in deep discharge mode.
• Solid – The charger is in Rapid Charge mode.
• Slowly flashing – The battery is charged and ready for use. The charger provides a
trickle charge to keep the battery at full charge.
The type of cable required for using the battery charger depends on the type of battery being
charged:
• Charger adapter cable – This is a shorter cable that provides easy access to charge
the RX2. The cable features a loop
RX2
RX2A051CBLRMT
AC
Charger
RX2A381CHGRUS
Bracket
Coupler
Breakaway
Connection
Figure 13 RX2 Battery Charger and Internal Battery
• External battery to charger adapter cable – This cable connects the charger to the
external battery.
AC
Charger
RX2A381CHGRUS
Breakaway
Connection
External
Battery
Figure 14 RX2 Battery Charger and External Battery
Preliminary - Draft 08