User's Manual

14 Connect Power Source
RX2 User’s Guide E-EQ-RX2OGWW-A
DC to DC Power Supply
If the vehicle does not provide 12V DC power, the DC to DC converter may be used. The DC to
DC converter accepts 24 – 60VDC input power and provides 12VDC output power.
The DC to DC power supply is designed to be mounted in the forklift cab. Customer supplied
wiring connects the DC to DC power supply (over the forklift mast) to the terminal block mounted
on the bracket. The cable from the terminal block connects to the RX2.
DC-DC
Power
Term
Block
9000A316PS24V72VBARE
RX2
RX2A051CBLRMT
Bracket
Termina l
Block
DC Power
over
Forklift Mast
Figure 11 DC to DC Power Supply Cabling
A power filter may be required when vehicles have unclean forklift power in which power spikes
cause problems with the RX2.
Preliminary - Draft 08