User's Manual
Table Of Contents
- Notices
- Revision Notice
- Table of Contents
- Illustrations
- Introduction
- Overview
- Laser Warnings and Labels
- Components
- Quick Start
- About Lithium-Ion Batteries
- RFID Introduction
- Insert Main Battery
- Attach Handstrap (Optional)
- Attach the Stylus Clip (Optional)
- Attach to Hip-Flip (Optional)
- Connect External Power Supply (Optional)
- Connect Audio Jack (Optional)
- Power Button
- Tapping the Touchscreen with a Stylus
- Touchscreen
- Set The Audio Speaker Volume
- Enter Data
- Getting Help
- The MX3X Hand Held Computer
- Key Maps
- Regulatory Notices and Safety Information
- Index
2 Overview
Related Manuals
The “MX3X User's Guide” contains mobile device installation, user instruction and safety
statements. An abbreviated user’s guide is available for download to the MX3X device from the
LXE Manuals CD or the LXE ServicePass website.
Please refer to the "MX3 Cradle Reference Guide" for technical information relating to the
MX3X-compatible Desk Top and Vehicle Mount cradles.
If you need to set up the integrated SE923 scanner barcode reading parameters, please refer to
the “Integrated Scanner Programming Guide” on the LXE Manuals CD or the LXE website
www.lxe.com.
Note: Always store unused devices with a fully charged main battery installed. LXE
recommends an in-use mobile device be frequently connected to an external power
source to retain optimum power levels in the main battery and the backup battery. When
the backup battery and main battery are dead, the mobile device reverts to it’s default
values when a fully charged main battery is installed and the device is powered On
again.
MX3X User’s Guide E-EQ-MX3XOGWW-C