User's Manual
Table Of Contents
- Notices
- Revision Notice
- Table of Contents
- Illustrations
- Introduction
- Overview
- Laser Warnings and Labels
- Components
- Quick Start
- About Lithium-Ion Batteries
- RFID Introduction
- Insert Main Battery
- Attach Handstrap (Optional)
- Attach the Stylus Clip (Optional)
- Attach to Hip-Flip (Optional)
- Connect External Power Supply (Optional)
- Connect Audio Jack (Optional)
- Power Button
- Tapping the Touchscreen with a Stylus
- Touchscreen
- Set The Audio Speaker Volume
- Enter Data
- Getting Help
- The MX3X Hand Held Computer
- Key Maps
- Regulatory Notices and Safety Information
- Index
Appendix A Key Maps
Keypad
Throughout this guide, an MX3X without an RFID Module is labeled “MX3X”. The MX3X with an RFID
Module is labeled “MX3-RFID”. Information specific to one or the other is labeled appropriately. No
distinction is made to information that is the same for both mobile devices.
Note: The key mapping in this appendix relates to the physical keypad. See section titled “Input Panel” for the
Virtual (or Soft) Keypad used with the stylus.
Key Map 101-Key Equivalencies
Note: This key mapping is used on hand held computers that are NOT running an LXE Terminal Emulator.
When using a sequence of keys that includes the 2
nd
key, press the 2
nd
key first then the rest of the key sequence.
Note: When the computer boots, the default condition of NumLock is On and the default condition of Caps (or
CapsLock) is Off. The Caps (or CapsLock) condition can be toggled with a 2
nd
+F1 key sequence. The
CAPS LED is illuminated when CapsLock is On.
Press These Keys and Then
To get this key
2
nd
Shift Ctrl Alt CapsLock
Press this key
Contrast x F6
Volume x F8
Backlight x F10
2
nd
2
nd
Shift Shft
Alt Alt
Ctrl Ctrl
Esc Esc
Space Spc
Enter Enter
Scan
2
Scan
CapsLock (Toggle) x F1
Back Space BkSp
Tab Tab
BackTab x Tab
Break x F2
Pause x x F3
2
Left Scan key default value is Scan. Right Scan key default value is Enter. When RFID Module
is installed, Right Scan key defaults to RFID Read and Left Scan key defaults to Scan or Enter or
Field Exit (5250 only).
E-EQ-MX3XOGWW-C MX3X User’s Guide