User's Manual

Connect Audio Jack (Optional) 13
Connect Audio Jack (Optional)
The audio jack is located on the endcap.
Figure 16 Connect Audio Jack
Insert the 2.5mm barrel end of the connector into the audio jack on the endcap and push the
connector in firmly. See section titled “Set the Audio Speaker Volume”.
Note: The audio option draws power from the battery.
Power Button
Note: Refer to the section titled "Power Modes" in the “MX3X Reference Guide” for
information relating to the power states of the mobile device.
Figure 17 Power Button
The power button is located above the ESC key on the keypad. When a battery is inserted in the
mobile device press the Power button.
Quickly tapping the Power button places the device immediately in Suspend mode. Quickly
tapping the Power button again, or touching the screen, immediately returns the device from
Suspend.
When the Windows desktop is displayed or an application begins, the power up (or reboot)
sequence is complete.
Please refer to the section titled "Power Modes" in the MX3X Reference Guide for a list of the
kinds of activities (Primary Events) that will return the device from Suspend Mode.
Restart Sequence
Tap the Start button then tap Restart. If the touchscreen is not accepting taps or needs
recalibration, press <Ctrl>+<Esc> to force the Start Menu to appear.
When the Windows desktop is displayed or an application begins, the power on (or reboot)
sequence is complete. If any changes to the settings had been saved previously, they are restored
on reboot.
Any RFID tag data retrieved and not saved is lost during a reboot or reset.
E-EQ-MX3XOGWW-C MX3X User’s Guide