User's Manual
Table Of Contents
- Notices
- Revision Notice
- Table of Contents
- Illustrations
- Introduction
- Overview
- Laser Warnings and Labels
- Components
- Quick Start
- About Lithium-Ion Batteries
- RFID Introduction
- Insert Main Battery
- Attach Handstrap (Optional)
- Attach the Stylus Clip (Optional)
- Attach to Hip-Flip (Optional)
- Connect External Power Supply (Optional)
- Connect Audio Jack (Optional)
- Power Button
- Tapping the Touchscreen with a Stylus
- Touchscreen
- Set The Audio Speaker Volume
- Enter Data
- Getting Help
- The MX3X Hand Held Computer
- Key Maps
- Regulatory Notices and Safety Information
- Index
12 Connect External Power Supply (Optional)
Connect External Power Supply (Optional)
There are three external power supplies available for the mobile device and the MX3 desktop
cradle:
• US AC/DC 12V Power Supply
• Cigarette Lighter Adapter
• International AC/DC 12V Power Supply
Figure 13 US AC/DC 12V Power Supply and Automotive Power Adapter
Figure 14 International AC/DC 12V Power Supply
The DC power jack is located on the endcap. The cradle power jack is located on the back of the
cradle.
Figure 15 Connect External Power Supply
1. Insert the barrel connector into the power jack on the endcap and push in firmly.
2. The CHGR LED above the keypad illuminates when the computer is receiving external
power through the power jack.
Note: When the mobile device is receiving external power through a powered cradle, the
cradle's Status LED and the mobile device's CHGR LED are illuminated.
See section titled “LED Functions” for explanations of the LEDs for the BATT B and BATT M
illuminations.
MX3X User’s Guide E-EQ-MX3XOGWW-C