Quick Start Guide
Table Of Contents
- Xenon™ XP 1952g/1952g-BF
- CCB01-010BT/CCB01-010BT-BF
- CCB-H-010BT/CCB-H-010BT-BF
- Cordless Area-Imaging Scanner and Charge Bases
- Quick Start Guide
- Getting Started
- Power Supply Assembly (if included)
- Connecting the Scanner
- USB:
- Keyboard Wedge:
- RS232 Serial Port:
- RS485:
- Reading Techniques
- Standard Product Defaults
- RS485 Interface
- USB Serial
- USB PC Keyboard
- Keyboard Country
- Locked Link
- Override Locked Scanner
- Unlinking the Scanner
- Trigger
- Streaming Presentation™
- Suffix
- Add Code ID Prefix to all Symbologies
- Function Code Transmit
- Charge Pack Status - Xenon XP 1952g-BF only
- EZConfig-Scanning
- Support
- Product Documentation
- Limited Warranty
- Patents
- Disclaimer
11
Unlinking the Scanner
If the base has a scanner linked to it, that scanner must be
unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the
base. Scan the Unlink Scanner bar code to unlink a scanner.
Trigger
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the trigger to
read) or Presentation mode (the scanner is activated when it
“sees” a bar code).
Note: Presentation Mode continuously draws power, so use of
the external power supply is recommended for this mode.
Unlink Scanner
Manual Trigger - Normal
(Default)
Presentation Mode