Brochure

ManualsBrandsHoneywell Home ManualsDampersTwo-Position Actuator for VU53 N.C. Valve Bodies, 120V 60Hz

40 63-8702

AQ1000TN2 Non-Programmable Communicating Thermostat

The AQ1000TN2 thermostat controls the ambient air or floor

temperature in hydronic heating applications. To provide zoning

control, it communicates with and is powered by a AQ2000 series

zoning module.

• Two-wire polarity-insensitive non-programmable network

communicating thermostat

• User buttons feature liquid crystal display as well as outdoor, indoor

and floor temperature displays

• Floor temperature sensing with minimum and maximum limits

(when used with optional AQ12C20 Slab/Floor Sensor (sold

separately))

• Selectable temporary and permanent backlight

Application: Hydronic single-stage zoning heat

Temperature Control Mode Selections: “A” for Ambient Air; “F” for

Floor; “AF” for Ambient & Floor.

Mounting: Vertical

Color: Premier White

Zones: Single or Multi-zone; Network Zoning available

Ambient Temperature Range: 32°F to 158°F (0°C to 70°C)

Shipping and Storage Temperature Range: -30°C to 55°C (-20°F to

130°F)

Operating Humidity Range (% RH): 5 to 90% RH, non-condensing

Electrical Connections: Wire-clamp screw terminals

Approximate, Dimensions: 2.8 in. wide x 4.6 in. high x 1.0 in. deep

(7 cm wide x 12 cm high x 2.5 cm deep)

Sensor Element: Thermistor

Network Bus: Low voltage, Class II, 2-wire polarity-insensitive, digital

communicating link to AQ2000 series zoning modules.

External Sensors Available: Floor Sensor - 10 Kohm NTC thermistor at

25°C (77°F) +/- 0.5°F (+/-0.3°C) up to 500 ft (150 M) using 18 AWG

or larger wire, beta=3892. Lead Length: 10 ft. (3050 mm) with rating

58°F to 230°F (-50°C to 110°C)

Outdoor Temperature Display Range: -58°F to 149°F (-5°C to 65°C)

Weight: 0.2 lb (0.1 kg)

Tradeline Value: Tradeline

User Interface: DIP Switches

Material Number Setting Temperature Range Differential Temperature Terminal Designations Display Power Method

AQ1000TN2/U Ambient and Floor -40°F to

100°F (Ambient and Floor

-5°C to 38°C)

± 1°F (±0.5°C) TH, TH, Sensor, Sensor LCD Display; Icons in display: Heat On, Vacation

Mode, Comfort/Unoccupied, Keypad Lock,

Set point; Temperatures Displayed: Indoor,

Setpoint, Outdoor

Powered (24 Vdc)

by AQ zoning

module

AQ1000TP2 Programmable Heat/Cool Thermostat

The AQ1000TP2 thermostat controls the ambient air or floor

temperature in hydronic heating applications. To providing zoning

control, it communicates with and is powered by a AQ2000 series

zoning module.

• Single-stage heating and cooling with outdoor, indoor, and floor

temperature display

• Two-wire polarity-insensitive non-programmable network

communicating thermostat

• Seven-day programmable thermostat with liquid crystal display and

seven user buttons for programming

• Selectable temporary and permanent backlight

Application: Hydronic single-stage zoning, heating and cooling

Temperature Control Mode Selections: Air for Ambient Air; “Floor” for

Floor; “Air/Floor” for Ambient & Floor