Brochure

63-8702 123
V2042H; V2043H One-pipe Steam Thermostatic Radiator Valve
One-Pipe Steam Thermostatic Radiator Valves - Allow automatic
temperature control in one-pipe steam or hot water systems for free
standing radiators, convectors and other heating units with standard
capacity requirements.
• Continually monitors and adjusts room temperature for consistent
comfort and relief from under-heating and overheating.
• Adjustable balancing cartridge design made from resilient material
(EPDM), ensures tight shut-off on steam and hot water systems.
• Nickel plated brass casted body.
• Replaceable cartridge for easy service with service tool.
• Controls include valve body, steam air vent.
• Used with T100 set point and capillary actuators.
• No electrical connection required for non-electric actuators.
• Normally open without control mounted.
Application: Use for one pipe steam applications.
Pipe Size (inch): 1/8 in.
Body Pattern: Angle
Capacity: Standard
Temperature Range: 248°F Maximum (120°C Maximum)
Connection Type: Inlet – NPT; Outlet – Threaded
Connection Size (in.): 1/8 in.
Materials (Body): Nickel Plated Bronze
Cartridge Change Tool: Yes - Use VA8200A001
Used With: T100
Maximum Differential Pressure Ratings (Close-off) (psi): With T100 or
T200: 15 psi, With MV100: 36 psi, For low noise: 3 psi
Maximum Differential Pressure Ratings (Close-off) (kPa): With T100
or T200: 103 kPa, With MV100: 248 kPa, For low noise: 20 kPa
Material Number
Pressure Ratings (psi) Pressure Ratings (kPa)
Includes
V2042HSL10 Steam – 15 psi maximum Steam – 103 kPa maximum
V2043HSL10 Steam – Valve: 15 psi maximum; Vent: 6 psi maximum Steam – Valve: 103 kPa maximum; Vent: 41 kPa maximum V2042HSL10 plus steam/air vent
Thermostatic Radiator Valves and Actuators