Brochure

63-8702 103
SuperVent
®
Air Eliminator Universal Models — Eliminate Air from
Hydronic Heating Systems without Bleeding
The SuperVent, purges air through a no clog vent assembly, to control
dirt and debris and minimize air vent fouling in Hydronic heating
systems, while eliminating the need for bleeding.
• No clog vent.
• Dirt and Debris resistant.
• 360 degree adjustable collar ring for installation flexibility.
• Stainless steel concentrator which eliminates gurgling noise.
• Bronze body for rigid construction.
• Threaded connections.
Application: Residential or Commercial closed loop hydronic heating
or chilled water systems
Connection Type: Female NPT
Operating Temperature Range: 240°F Maximum (115°C Maximum)
Maximum Safe Operating Pressure (psi): 125 psi
Maximum Safe Operating Pressure (kPa): 862 kPa
Materials: Bronze
Typical Installation
UNIVERSAL SUPERVENT
INSTALLATION
OUT TO SYSTEM PIPING SYSTEM FILL
OUT FROM BOILER
EXPANSION TANK
DIAGRAM FOR ILLUSTRATION PURPOSES ONLY.
SUPER VENT
M13834A
VENT
YEAR
WEEK
Material Number Pipe Size (inch) Connection Size (in.) Capacity (Cv) Dimensions H x L x W inches (mm) Weight
PVU100/U 1 in. 1 in. bottom inlet 12 Cv 8.4 x 3.2 x 2.1 (213 x 81 x 53) 2.8 lb (1.3 kg)
PVU125/U 1 1/4 in. 1 1/4 in. bottom inlet 27 Cv 8.9 x 3.7 x 2.5 (226 x 94 x 63) 3.6 lb (1.6 kg)
PVU150/U 1 1/2 in. 1 1/2 in. bottom inlet 36 Cv 10 x 4.3 x 3.1 (254 x 109 x 79) 5.2 lb (2.4 kg)
Air Vents and Eliminators