Product Overview

V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES
60-2133—12 12
Fig. 11a. Install 40003918 conversion kit with brass
adapter plate.
Fig. 11b. Valve body assembly with composite (stainless
steel and plastic) adapter plate.
Fig. 12. Install new powerhead.
SYSTEMS WITH NEW STYLE VALVE BODIES (SERIES 6)
IMPORTANT
On a new style valve body or a valve body that was
converted to accept the new powerhead, it is not
necessary to drain the system if the valve body
remains in the pipeline.
1. Disconnect the power supply before connecting the
wiring to prevent electrical shock or equipment dam-
age.
2. Disconnect the leadwires to the powerhead at the
terminal block or conduit connection. Remove the
conduit or cable connector, if fitted. Label each wire
for rewiring.
3. Remove the old powerhead (see Fig. 13):
a. Place the manual opening lever (normally closed
models only) on the old powerhead in the MAN.
OPEN position (Fig. 13A).
b. Remove the screw securing the cover to the pow-
erhead (Fig. 13B).
c. Lift off the cover from the powerhead.
d. Remove the two screws securing the powerhead
to the valve body (Fig. 12).
e. Lift the powerhead off the valve body.
4. Install the new power head (see Fig. 12):
a. Place the manual opening lever (normally closed
models only) on the new powerhead in the MAN.
OPEN position.
b. Fit the powerhead onto the valve body, ensuring
that the shaft seats correctly. The powerhead
should be aligned with the manual opening lever
or slot for lever at the port A end of the valve
body.
c. Secure the powerhead to the valve body with the
two screws provided.
d. If fitted, reconnect the conduit or cable. Recon-
nect the leadwires to the powerhead.
e. Replace the powerhead cover.
5. Turn on the power.
A
B
HEX-NUT SCREW
WITH DOMED HEADS (2)
HEX-NUT SCREWS
WITH RECESSED
THREADS AND
SHOULDER SHANK (2)
BRASS
ADAPTER
PLATE
O RING
LOCATING
RECESSES (3)
VALVE
BODY
M32317
STEEL
PLATE
A
B
HEX-NUT SCREW
WITH DOMED HEADS (2)
HEX-NUT SCREWS
WITH RECESSED
THREADS AND
SHOULDER SHANK (2)
PLASTIC
PLATE
O RING
LOCATING
RECESSES (3)
VALVE
BODY
M32316
A
B
V8043F 1036
24V 50/60 CY
.32 AMP @ 60 CY
6
SECURING
SCREW (2)
REMOVABLE
HEAD
SHAFT
REMOVABLE HEAD
VALVE BODY ASSEMBLY
M10173A