Product Overview

ManualsBrandsHoneywell Home ManualsHeating Supplies1" 3-Way Mixing Valve (Female Sweat Union)

Honeywell y Subject to change EN0H-2800GE25 R0110

V135

Diverting and Mixing Valve

PRODUCT DATA

V135B

V135C

Design

The V135 constists of:

• Valve housing PN16 with internal or external threads

• Control insert

• Handwheel cap

• Union-nuts, threaded tailpieces and sealings (C type only)

Materials

• Valve housing made of red bronze

• Valve insert made of brass and plastic with EPDM O-rings

and soft seals

• Handwheel cap made of white plastic

• Union-nuts and tailpieces made of brass

Application

The V135 is a three-way mixing or diverting valve for hot water

heating systems. It is typically used with a T100R or T100RS

thermostat for hot water control applications, e.g. temperature

control of underfloor heating systems.

Features

• Balanced valve insert for high differential pressure resi-

stance

• Small stroke with high kv-value

• Robust red bronze valve housing

• Handwheel cap supplied with valve

• Upper spindle sealing can be replaced under system

pressure

Specifications

Suitable Actuators

• Honeywell T100R/RS thermostat for water and air

• Honeywell Smart-T thermal actuator

Medium Water or water-glycol mixture,

quality to VDI 2035

pH-value 8...9.5

Operating temperature max. 120°C (248°F)

Operating pressure max. 16bar (232psi)

Differential pressure

with T100R thermostat

max. 10bar (145psi)

kv(cv)-value see table on page 2

Flow AB -> A or B

A or B -> AB

Starting position AB - A (B closed)

Stroke 2mm

Closing dimension 11.5mm

Actuator connection M30 x 1.5

Summary of content (4 pages)

PAGE 1
V135 Diverting and Mixing Valve PRODUCT DATA Application The V135 is a three-way mixing or diverting valve for hot water heating systems. It is typically used with a T100R or T100RS thermostat for hot water control applications, e.g. temperature control of underfloor heating systems.
PAGE 2
V135 DIVERTING AND MIXING VALVE Function As mixing valve on primary side (in connection with T100R/RS thermostat): As diverting valve on primary side (in connection with T100R/RS thermostat): The thermostat sensor is attached to the supply pipeline of the secondary loop. The combination of V135 and T100R/RS acts as mixing valve and controls the amount of primary supply (port A) and return water (port B) to achieve the desired hot water temperature in the secondary supply loop.
PAGE 3
V135 DIVERTING AND MIXING VALVE Accessories Please Note: • To avoid stone deposit and corrosion the composition of the medium should conform with VDI-Guideline 2035 Valve insert V135A-1/2VE • Additives have to be suitable for EPDM sealings V135A-1VE • System has to be flushed thoroughly before initial operation with all valves fully open V135A-11/2VE • Any complaints or costs resulting from non-compliance with above rules will not be accepted by Honeywell Thermostat with remote sensor (screw-in sens
PAGE 4
V135 DIVERTING AND MIXING VALVE Flow Diagram 6 DN25+DN32 10 mbar 1000 Pa Pressure drop 2 3 4 5 6 7 8 9 100 10000 2 3 4 5 DN15 DN20 10 Flow kg/h 0,0028 2 l/sec 3 4 5 0,01 6 7 8 9 100 0,025 2 3 0,05 Environmental and Combustion Controls Honeywell GmbH Hardhofweg 74821 Mosbach, Germany Phone: +49 (6261) 810 Fax: +49 (6261) 81393 www.honeywell.com EN0H-2800GE25 R0110 January 2010 © 2010 Honeywell International Inc.