User Guide

UV100E ULTRAVIOLET SYSTEM
9 69-1573—07
NOTE: Failure to wait ten minutes for the airflow sensor to calibrate before powering the system fan causes the
airflow sensor to incorrectly calibrate and the device to incorrectly function. If this occurs, remove
power to the furnace or turn off the system fan, wait ten minutes, and then resume normal fan
operation.
11. Verify that your ultraviolet bulb is operating by viewing only through the lamp light indicator on the lamp
handle. Never look directly at your bulb while
it is illuminated.
12. Reconnect power to your heating and cooling system.
Bulb Replacement
Replacement of the bulb in your ultraviolet lamp when the LED is solidly lighted is required to maintain
effectiveness.
1. Obtain the correct replacement bulb/handle assembly or replacement bulb for your unit. See Table 1.
2. Disconnect the power to your heating and cooling system.
3. Unplug or turn off power to your UV System and allow the bulb to cool for at least 15 minutes.
4. Rotate the lamp handle counterclockwise and gently pull the lamp handle to remove the bulb. See Fig. 5.
5. If you have a SnapLamp™ handle, follow steps 5 and 6; otherwise, proceed to step 7. Grasp the Sna-
pLamp™ handle in one hand and the lamp glass in the other and pull straight apart. See Fig. 10.
Fig. 10. Disconnect lamp glass from SnapLamp™ handle.
6. Insert the new lamp glass into the SnapLamp™ handle by aligning the key and pushing straight together.
See Fig. 11.
Fig. 11. Replace lamp glass in SnapLamp™ handle.
7. Insert the bulb into the base with the lamp light indicator at the eleven o’clock position. Continue pushing
and gently rotating counterclockwise until the lamp handle inserts fully into the base. See Fig. 8.
Table 1. Select a Replacement Bulb/Handle Assembly or Replacement Bulb.
Unit Description
Replacement Bulb/Handle
Assembly SnapLamp™ Replacement Bulb
UV100E1043
Air Treatment System
UC100E1006 UC18W1004
UV100E2009
Air Treatment System
UC100E1030
(two needed)
UC36W1006
(two needed)
UV100E3007
Surface Treatment System
UC100E1030 UC36W1006
M22852
M22854