User Guide

ManualsBrandsHoneywell Home ManualsAir CleanersSmartLamp UV Air Treatment System, Dual Lamp Return Air Model

1

2

3

4

5

6

7

8

9

Table Of Contents

UV100E ULTRAVIOLET SYSTEM

69-1573—07 8

7. Insert the bulb into the base with the lamp light indicator at the eleven o’clock position. Continue pushing

and gently rotating counterclockwise until the lamp handle inserts fully into the base. See Fig. 8.

Fig. 8. Position bulb for insertion back into the lamp base.

8. Rotate the lamp handle clockwise until it snaps into place with the lamp light

indicator aligned with the raised button on the unit cover. See Fig. 9.

Fig. 9. Snap bulb into place.

9. Reconnect power to your UV System.

10. For UV Air Treatment Systems, wait ten minutes for the airflow sensor to

calibrate. During this time, the furnace fan must remain off.

M22848

M22850