User Guide

UV100E ULTRAVIOLET SYSTEM
69-1573—07 2
IMPORTANT
Please read these instructions and keep them in your records.
HOW YOUR ULTRAVIOLET AIR TREATMENT SYSTEM OR
SURFACE TREATMENT SYSTEM WORKS
Your UV System uses patented SmartLamp™ control technology that monitors the HVAC system to operate the
lamp only when needed. This technology extends bulb life up to five times and reduces power consumption,
lowering operating costs. Your UV System also includes protection from extreme conditions that may be found
in your heating and cooling system and local diagnostics with the SmartLamp™ LED and reset capability.
Depending on installation, your UV System can operate as an Air Treatment System or as a Surface Treatment
System.
Air Treatment System
Installed in the return air duct of your system, your Ultraviolet Air Treatment System kills a high percentage of
airborne germs circulating through your forced air heating and cooling system. Individual results depend on
careful installation and maintenance and on the actual amount of time your system fan operates. See Fig. 1.
Your Ultraviolet Air Treatment System uses the on-board air flow sensor or input from the Enviracom™
communication terminals to monitor air flowing through your heating and cooling system. The UV system turns
on when air is flowing and leaves the lamp on for 40 minutes after the airflow stops. If airflow resumes during
the 40 minutes, the timer resets to 40 minutes. When no airflow is detected for 40 minutes, the lamp turns off
until the next occurrence of airflow.
Fig. 1. Typical Air Treatment System installations.
M22858
WAR
NING/AVERTISSEMENT
!
Nocifs
pour la peau
nue et
les
Veuillez lire et bien com
pren
dre
l’installation et la maintenanc
e.
WARNING/AVERTISSEMENT
!
Nocifs pour
la peau
nue
et l
es
Veuillez l
ire
et bien com
prendr
e
l’ins
tallation et l
a mai
ntenanc
e.