User Manual

Install Doorbell

If you are not mounting the doorbell to the wall, place

it where you want it.

1. Screw the doorbell wall mounting bracket to the

wall using the included screws and anchors (if

necessary).

Drill 1/4 inch holes for the anchors.

2. Hang the doorbell on the mounting bracket.

Installation

Choose a location that is not near a heat source or on something that moves

(like a door). For non-mounting locations, choose a place where the doorbell

will be easy to hear.

Install Push Button

1. Mount the push button bracket

in the desired location.

Use the screws



Use the adhesive backing. If

using the adhesive backing,

clean the surface first.

2. Snap the push button onto the

mounting bracket.

–OR–

Note: If you need to remove the push button, use a small

screwdriver to release the tab.

33-00185EFS_A.indd 3 4/15/2016 3:10:40 PM