Install Instructions

PS1201C, PS2401C, PS1202C REPLACEMENT POWER SUPPLY KITS FOR ELECTRONIC AIR CLEANERS
3 69-1138—03
Fig. 2. Power supply location on F50A,E one-cell,
F55A,E and F58A,E air cleaners (one-cell F50 shown).
Fig. 3. Power supply enclosure location on F52C Air
Cleaner. Open to access power supply.
Fig. 4. Power box cover location on F54C. Remove
four screws to access power supply.
Fig. 5. Power supply location on F56A and F59A Air
Cleaners.
To Remove W919 Power Supply
 Disconnect the red ionizer and black collector leads at
the W919 quick-connects.
 Disconnect remaining leads at the quick-connects or
Molex plug on the air cleaner.
 Remove and set aside the sheet metal screws holding
the W919 in place. Discard the W919.
To Remove Solid State Power
Supply
 Disconnect the leads from P1, P2, P3 and P4 on the
old power supply.
 Remove and set aside the sheet metal screws holding
the board in place.
 While holding the board, remove the leads from P5, P6
(if connected).
 Discard the old power supply.
CELL CONTACT PLATES
CELL LATCH
CELL
PLASTIC CELL HOOKS
HINGE
PREFILTER
TEST
BUTTON
(ON DOOR)
POWER
SUPPLY
ENCLOSURE
INTERLOCK
SWITCH
ON-OFF SWITCH
WITH NEON LIGHT
M11514A
POWER
CORD
TEST
BUTTON
POWER BOX
COVER
DISCHARGE LOUVERS
(4 SIDES)
NEON LIGHT
SWITCH (OFF-LOW-
MEDIUM-HIGH)
CELL (2)
ACCESS DOOR
GRILL AND
PREFILTERS
M11512A
M11513A
PREFILTER
PREFILTER
CELL
FAN
ACCESS
COVER
POWER CORD
AND PLUG
TURN UNIT UPSIDE DOWN
TO ACCESS POWER SUPPLY