Owner's Manual

USE AND OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

The default display is setting temperature.

In cooling mode, when or button is pressed, the set temperature is displayed and may be

adjusted.

Note: By pressing both or buttons at the same time, the display will toggle between Celsius

(°C) and Fahrenheit (°F).

•

TEMPERATURE CONTROL

4 settings: High, Medium, Low and Auto.

Note: Auto fan speed can be selected in cooling mode only.

FAN SPEED CONTROL

MODE CONTROL

Air Conditioning Mode (COOL)

Adjust fan speed and air temperature to suit your desired comfort level.

Temperature setting range is 16°C - 32°C (60°F - 90°F).

Ambient temperature range is 16°C - 35°C (60°F - 95°F).

•

Settings: Air Conditioning, Dehumidifying, Fan, Auto.

The corresponding indicator light will illuminate to indicate the current mode setting.

Dehumidifying Mode (DRY)

Fan speed is preset to Low.

Note: If the unit will be used mainly as a dehumidiﬁer, do not connect the hose. Continuous

drainage is then necessary (refer to Continuous Draining for Dehumidiﬁer Mode).

IMPORTANT: The Dehumidifier mode is used to support moisture reduction but should not

be expected to dehumidify to the same degree as a standard dehumidifier-only appliance. The

built-in dehumidiﬁer automatically adjusts dehumidiﬁcation based on ambient room temperatures.

It is not possible to adjust to a desired humidity percentage. The front display only shows the

current and desired temperatures. It does not show humidity levels.

•

Fan Mode

For air circulation without air conditioner cooling.

Note: Auto fan speed cannot be selected in fan mode.

Auto Mode

Press the or button to select the temperature you want.

In this mode, the unit will automatically select cooling or fan only depends on the set temperature

and the room temperature. The Portable Air Conditioner will control room temperature

automatically around the set temperature.

Note: Fan speed can't be adjusted in auto mode.

•