Owner's Manual
6
INSTALLATION (CONTINUED)
IMPORTANT:
Do not replace or lengthen the hose as this could cause the unit to malfunction.
The supplied hose has a diameter of 5.9" (15 cm) and can be extended from 
10.6" to 59" (27 cm to 150 cm).
Do not bend (to the extent shown below) the hose. A bent hose will block exhaust air
and cause the unit to malfunction or shut-off.
Make sure the back of the unit is at least 20" (50 cm) away from the wall. Do not place the unit in 
front of curtains or drapes as this could obstruct the airflow.
•
•
•
WARNING: Any warranties included with this product will be voided if an extra extension hose is 
added to the originally provided installation kit or if the installation is performed differently than the 
manufacturer's instructions, without proper consultation. Please contact Customer Support for help 
with installation procedures if needed.
Not Recommended Recommended
EN
20" (50 cm)
MIN 31 cm 
MAX. 12" (31 cm)
MAX. 43" (110 cm)










