Specification Sheet
• Weather-proof and water-resistant
housing makes it ideal for harsh
outdoor climates
-40º F to 150º F
(-40º C to +66º C), (100% RH)
• Maximum magnet gap
1.75" on
wood, vinyl and non-metallic
surfaces and 1.25" on steel to
facilitate easier installation
• Two long life AA lithium batteries,
easily replaceable
• Built-in reed switch contact loop
•
Built-in wired closed contact loop
(for use with external devices)
• Tamper protection-removal of
front cover and transmitter from
mounting plate
• Screw mountable
• Stainless steel or nylon cable tie
mountable (ties not included)
•
Magnet and magnet spacer included
• Paintable plastic housing to match
any surface
FEATURES
5816OD
OUTDOOR WIRELESS CONTACT/TRANSMITTER
COMPONENT IDENTIFICATION
SENSOR
MOUNTING
PLATE
MAGNET
MAGNET
SPACER
SENSOR
BATTERY
CHAMBER
COVER
FLAT SURFACES
COVER
SCREW
MOUNTING
SCREW (4)
MAGNET
MAGNET
SPACER
MOUNTING
SCREW (2)
SENSOR
SENSOR
MOUNTING
PLATE
FENCE
POST
FENCE
GATE
CURVED SURFACES
MAGNET
SENSOR
GATE
POST
GATE
SENSING
SLIDE
COVER
SCREW
FENCE
MAGNET
SPACER
SENSOR
MOUNTING
PLATE
MAGNET
MOUNTING
*Recommended Paints: Krylon
®
"Fusion for Plastic", Rust-Oleum
®
"Plastic" and Dupli-Color
®
"Vinyl & Fabric Coating"
All trademarks are properties of their respective owners
Magnet and batteries included
Honeywell’s robust 5816OD is a weatherproof, water-
resistant outdoor wireless transmitter that provides excellent
detection and performance in extreme temperatures. It
operates in temperatures from -40˚ F to 150˚ F (-40˚ C to
+66˚ C), (100% RH). The 5816OD also contains two unique
zones. The first loop is a normally closed circuit contact that
can have external devices wired directly to it. The second
loop is a built-in magnetic reed switch that can be used to
protect gates, sheds, detached garages or any other
outdoor area with an exit/entry point. It is also an ideal way
to protect outdoor equipment when using outdoor rated
magnetic pull apart contacts. With its dark gray housing, the
5816OD blends well with most outdoor surroundings and
can be custom-painted* to match its mounting surface.