User Manual

Service Tools
SmartRadar FlexLine Part No.: 4417.762_Rev07
4 - 16 Service Manual
4.2 Engauge
4.2.1 Connecting the Engauge Service Tool
The Engauge service tool is a PC application with which all FlexConn
module settings can be done as well.
4.2.1.1 Wired Connections Situation (FIGURE 4-17)
Connecting the serial COM-port of a PC or laptop via an RS-232 (or RS-
485) transmission line to either a Communication Interface Unit (CIU) or
a SmartLink, enables the control of a SmartRadar FlexLine system.
ESF07-0041
FIGURE 4-17 Connecting the Engauge service tool - wired connections
SAFE ZONE (control room)
HAZARDOUS ZONE (field)
CIU Prime SmartLink
field line
BPM or RS-485
ENTIS or other host
RS-232 (or RS-485) RS-232 (or RS-485)