User Manual

Service Tools

SmartRadar FlexLine Part No.: 4417.762_Rev07

4 - 12 Service Manual

4.1.5.1.11 Commands Menu Screens

 The [commands] menu starts with the [board list] screen 

(see FIGURE 4-10).

You can navigate through the board list by using the up and down

buttons. A board can be selected by simultaneously pressing the left

+ right button.

ESF07-0034

FIGURE 4-10 The board list screen

 The

[function list] screen (see FIGURE 4-11) shows all available

functions of the previously selected board. You can navigate through

the function list by using the up and down buttons. You can return to

the

[board list] screen by pressing the left button. A function can be

selected by simultaneously pressing the left + right button. If a

FlexConn module does not contain any function commands, this will

be indicated in the list (

<no cmd>).

ESF07-0045

FIGURE 4-11 The function list screen

 On selection of an available function, the

[command list] screen is

presented (see FIGURE 4-12). You can navigate through the

MAIN