User Manual

Service Tools

Part No.: 4417.762_Rev07 SmartRadar FlexLine

Service Manual 4 - 9

4.1.5.1.8 Extra Information Screen

The

[extra information] mode can be configured to show either the [level &

temperature]

screen or the [extra information] screen (see FIGURE 4-7). The

[extra information] screen shows information about a specific function. The

specific functions are described in chapter 6. The

[level & temperature]

screen (see FIGURE 4-7) shows information about the measured

product level and temperature. In this menu mode, it is not possible to

change any settings.

NOTE: In case of an error situation, the level fields are filled

with “#” and the temperature fields with “9”.

ESF07-0039/0012

FIGURE 4-7 The level & temperature screen (left) and the extra information screen (right)

4.1.5.1.9 Primary Value Screen

The

[Primary Value] screen (PV-screen), shown in FIGURE 4-8, depicts

information about data measured by a sensor, or information about the

status of a digital I/O. See table TABLE 4-2.

ESF07-0028 + 0044

FIGURE 4-8 PV-screen examples (left: level status, right: digital I/O status)

MAIN