User Manual

Service Tools
SmartRadar FlexLine Part No.: 4417.762_Rev07
4 - 6 Service Manual
TABLE 4-1 The menu items
4.1.5.1.3 Backlight Screen
The [backlight] screen (see FIGURE 4-4) allows you to enable/disable the
backlight. The SmartView will only turn the backlight ON if following
conditions are met:

[backlight] is enabled by the host

[backlight] is enabled by the user
When the left or right button is pressed, the backlight setting
immediately changes. The backlight setting is stored in non-volatile
memory.
ESF07-0031
FIGURE 4-4 The backlight screen
[display settings]
Allows you to switch ON/OFF buttons time-out:
x Main screen: If no button is pressed within 15
minutes, SmartView switches to PV screen
x Standby mode: If no button is pressed within 
15 minutes, SmartView switches to standby mode
[display test]
Performs blank/black test
[extra information]
The [extra information] screen shows information about
a specific function. See also 4.1.5.1.8.
Menu Item Description
><
<
<
MAIN