User Manual

Service Tools
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 4 - 5
4.1.5.1.1 Start-up Screen
The SmartView starts up showing:
1. Black test
2. Blank test
3. Enraf logo + software version + tank ID
4. PV screen
4.1.5.1.2 Menu Screen
By using the
[menu] screen of the SmartView (see FIGURE 4-3) you can
view and/or modify settings, or you can send a specific command to a
sensor or a digital I/O board.
ESF07-0030
FIGURE 4-3 The menu screen
Menu Item Description
[menu]
Screen title.
[commissioning]
Within this menu, configuration parameters can be set
[commands]
Allows you to send a command to a sensor or digital I/O
board
[display contrast]
Allows you to adjust the display contrast
[backlight]
Allows you to switch ON or OFF the backlight
[identification]
Shows information about:
x Tank name
x Tank address
x Customer ID
x SmartView software version
x SmartView address
x FlexConn module name, board ID, board instance,
and software version
><
<
<
MAIN