User Manual

System Architecture
SmartRadar FlexLine Part No.: 4417.762_Rev07
3 - 12 Service Manual
3.5 Engauge Service Tool
The Engauge service tool is a PC application with which all FlexConn
module settings can be done as well.
By means of the Engauge’s explorer, each FlexConn module of the
concerned SmartRadar FlexLine system can individually be selected by
double-clicking on the module’s icon. The so-called “board descriptor” is
loaded then resulting in a screen with “tab” pages. By selecting these
tab pages, all settings of the specific module are accessible.
See example below.
ESF09-0001
FIGURE 3-5 Example of an Engauge screen