User Manual
Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 143
ESF07-0019
FIGURE 6-38 Multiple Resistance Thermometer (MRT) parameters
6.10.3.2.1 Product Temperature
☛ The following entities must be set by Engauge or SmartView for a
correct functioning of the FII-VT module in an instrument.
NOTE: Using Engauge, following entities are set within the
Engauge Product temperature tab.
anchor eye
Zero level of tank
lowest point of all elements
lowest element offset
hysteresis
product immersion depth
extension tube
flying leads
**