User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 131
☛ The following entities can be set by Engauge or SmartView for a
correct functioning of the HCI-HAO module in an instrument.
If one needs to assign SV, TV, QV to HCI-HAO then the corresponding
unit codes also needs to be set properly so that the value read from
other FlexConn board will be proper.
Name Explanation Default Value
Function
Part
Function
[SV Link board ID] Board ID of Other FlexConn
which is linked as SV to
HCI-HAO
<0> Board Board Specific
[SV Link board instance] Board Instance of the linked
SV board
<0>
[SV Link function instance] Function Instance of the
linked SV board
<0>
[TV Link board ID]
Board ID of Other FlexConn
which is linked as TV to
HCI-HAO
<0>
[TV Link board instance] Board Instance of the linked
TV board
<0>
[TV Link function
instance]
Function Instance of the
linked TV board
<0>
[QV Link board ID] Board ID of Other FlexConn
which is linked as QV to
HCI-HAO
<0>
[QV Link board
instance]
Board Instance of the linked
QV board
<0>
[QV Link function
instance]
Function Instance of the
linked QV board
<0>
[Linked Primary Value] PV / SV value of linked PV
board in the set unit code
<0>
[Linked Secondary
Value]
PV value of linked SV
board in the set unit code
<0>
[Linked Tertiary Value] PV value of linked TV board
in the set unit code
<0>
[Linked Quarternary
Value]
PV value of linked QV
board in the set unit code
<0>