User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 115
TABLE 6-10 Default function category, type, and sub-type
The function type entity for Functions 3 through 7 can be changed from
the default value
<HART transmitter> to provide more information about the
sensor, by setting the
[User function type] entity and then resetting the FCI-
HT board.
The possible values are detailed in TABLE 6-11.
TABLE 6-11 Generic HART user function types
Functions 1 through 8 have fixed values for
[PV Unit Type] and [Function
Identification]
entities, as detailed in TABLE 6-12.
Function 4 Temperature Sensor (1) HART transmitter (12) (16)
Function 5 Pressure Sensor (1) HART transmitter (12) (16)
Function 6 Density Sensor (1) HART transmitter (12) (16)
Function 7 Other Sensor (1) HART transmitter (12) (16)
Function 8 HIMS Density Sensor (1) Product density (6) (8)
Function Allocation User Function Type Value
Function 3 Distance User function type product level 4
User function type water level 9
Function 4 Temperature User function type product temperature 8
User function type vapour temperature 7
Function 5 Pressure User function type product pressure 5
User function type vapour pressure 13
Function 6 Density User function type product density 6
Function 7 Other User function type product level 4
User function type water level 9
User function type product temperature 8
User function type vapour temperature 7
User function type product pressure 5
User function type vapour pressure 13
User function type product density 6
Function Allocation
Function
Category
Function Type
Function
Sub-type