User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 81
With jumpers, the relays can individually be set to Normally Open (NO)
or Normally Closed (NC).
In addition to the board’s
[Health] LED LE1, the LEDs LE2 and LE3 are
available (see FIGURE 6-19). They can be associated to a relay, by
setting the
[LED Association] entity.
☛ For a fail-safe level application, continue with section 6.6.10.
6.6.2 Operation Mode
The FII-DO can operate in one of two modes:
[Alarm Mode] and [Fallback
Mode]
. This is controlled by the [Operation Mode] entity.
Fallback Mode is not implemented yet.
☛ Set the
[Operation Mode] entity to [Alarm Mode].