User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 77
• or, Field02:
(with TII-XR firmware version A1131 and board descriptor V5)
• or, Verification pins:
(from TII-XR firmware version A1140 and board descriptor V6)
For the SmartView the command is implemented from TII-XR firmware
version A1142, and resides under the Command menu as follows:
☛ From the menu select:

[Commands]
 board [TII-XR] and

[Product level].
☛ Then scroll through the list of commands, and select the command
[Enable v-pins].
To disable the verification pin compensation, proceed as follows:
 By Engauge:
☛ Set the appropriate field in the Compensation TAB to
<False>.
 By SmartView:
☛ From the menu select:

[Commands]
 board [TII-XR] and