User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 67
For correct measuring results, a number of parameters such as
[Tank bottom position], [Upper reference position], and [Offset to roof] must be
defined before.
In addition, alarm settings and compensation (filtering) constants are to
be set.
This can be done by using either Engauge or SmartView.
6.5.2.2 Level Start-Up
For entity definitions, see FIGURE 6-7 and FIGURE 6-8.
ESF07-0008
FIGURE 6-7 Basic commissioning entities
Radar reference
Maximum Safe Fill height
level ullage
(innage)
Nozzle
length
Free Space applications Stilling Well applications
Offset
to roof
Tank bottom position
Upper reference position
Stilling well
diameter