User Manual

Commissioning
SmartRadar FlexLine Part No.: 4417.762_Rev07
6 - 60 Service Manual
6.4.8 Using the SmartView with the OneWireless Communication Option
6.4.8.1 Introduction
The SmartView replaces the display that is usually available on
OneWireless transmitters.
6.4.8.2 SmartView OneWireless Status Display
At the Smartview, there is a special OneWireless status display
available, called the
[extra information] display. See screen below.
This screen is required during commissioning for the authentication
process and to check the wireless connection quality. It can also be
used in case of wireless connection problems.
☛ At the Smartview, enter the menu by pressing +
simultaneously.
☛ Scroll to the menu item
[extra information], and press +
simultaneously, to enter the OneWireless screen.
NOTE: Since this
[extra information] screen is also used for
other purposes, it may be possible that you have to
configure the 990 SmartRadar to show this screen
when the
[extra information] menu item is selected.
This can be done on the SmartView itself or by using
Engauge, see 6.7.2.
Parameter Description
PRSSI Primary RSSI = Signal strength indicator for primary wireless connection
SRSSI Secondary RSSI = Signal strength indicator for the redundant wireless connection
Connection status Radio connection status
SD Status SD-memory card status
><
<
<
MAIN